Rilsamid® AESNO P10 TL

Nombres alternativos y comerciales
PA12
Want to keep this datasheet? Save it now in your required format

Description

Rilsamid® AESNO P10 TL resin is a plasticized conductive grade designed for tube extrusion. AESNO P10 TL resin is a natural polyamide 12. This grade is plasticized and designed for tube extrusion.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueConditionTesting Standard

Densidad

1.03 g/cm³

Show Supplier Material materials with Densidad of 1.03 g/cm³

dry

ISO 1183

Mecánica

PropertyTemperatureValueConditionTesting StandardComment

Dureza Shore D

69 [-]

Show Supplier Material materials with Dureza Shore D of 69 [-]

dry

ISO 7619-1

15 seconds

Elongación

50 %

Show Supplier Material materials with Elongación of 50 %

cond.

ISO 527-1/-2

min. | nominal

Elongation at yield

20 %

Show Supplier Material materials with Elongation at yield of 20 %

cond.

ISO 527-1/-2

Límite elástico

27 MPa

Show Supplier Material materials with Límite elástico of 27 MPa

cond.

ISO 527-1/-2

28 MPa

Show Supplier Material materials with Límite elástico of 28 MPa

dry

ISO 527-1/-2

Módulo elástico

0.71 GPa

Show Supplier Material materials with Módulo elástico of 0.71 GPa

cond.

ISO 527-1/-2

Resistencia al choque, ensayo Charpy entallado

-30 °C

1 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 1 kJ/m²

cond.

ISO 179/1eA

23 °C

9 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m²

cond.

ISO 179/1eA

Resistencia al choque, ensayo Charpy no entallado

No Break at 23 and -30°C

cond.

ISO 179/1eU

Aplicaciones térmicas

PropertyValueConditionTesting StandardComment

Temperatura de fusión

180 °C

Show Supplier Material materials with Temperatura de fusión of 180 °C

dry

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Velocidad de flujo del volumen derretido

8 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 8 cm³/10min

dry

ISO 1133

235°C/2.16kg

Technological properties

Property
Application areas

Tubing and Hoses