Propiedades
General
| Property | Value | Condition | Testing Standard |
|---|---|---|---|
Bio-based content | 55 % Show Supplier Material materials with Bio-based content of 55 % | ||
Densidad | 1.16 g/cm³ Show Supplier Material materials with Densidad of 1.16 g/cm³ | dry | ISO 1183 |
Mecánica
| Property | Temperature | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|---|
Dureza Shore D | 66 [-] Show Supplier Material materials with Dureza Shore D of 66 [-] | dry | ISO 7619-1 | 15 seconds | |
Elongación | 50 % Show Supplier Material materials with Elongación of 50 % | cond. | ISO 527-1/-2 | min. | nominal | |
Elongation at yield | 45 % Show Supplier Material materials with Elongation at yield of 45 % | cond. | ISO 527-1/-2 | ||
Límite elástico | 27 MPa Show Supplier Material materials with Límite elástico of 27 MPa | cond. | ISO 527-1/-2 | ||
Módulo elástico | 0.705 GPa Show Supplier Material materials with Módulo elástico of 0.705 GPa | cond. | ISO 527-1/-2 | ||
Resistencia al choque, ensayo Charpy entallado | -30 °C | 9 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 9 kJ/m² | cond. | ISO 179/1eA | No Break at 23°C |
Resistencia al choque, ensayo Charpy no entallado | No Break at 23 and -30°C | cond. | ISO 179/1eU |
Aplicaciones térmicas
| Property | Value | Condition | Testing Standard | Comment |
|---|---|---|---|---|
Temperatura de fusión | 182 °C Show Supplier Material materials with Temperatura de fusión of 182 °C | dry | ISO 11357-1/-3 | 10°C/min |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Fuel Management - Fuel Lines,Fuel Management - In-Tank and Fuel Venting Lines | |
| Fillers | Carbon Black | |
| Processing methods | Extrusion: | |