Rilsan® BESVO A MED

Nombres alternativos y comerciales
PA11

Want to keep this datasheet? Save it now in your required format

Description

PA11, E, 22-010

Rilsan® BESVO A MED resin is a polyamide 11 produced from a renewable source. This natural grade, dedicated to extrusion, contains a negligible amount of oligomers.

Rilsan® BESVO A MED resin offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices. Upon request letters regarding USP Class VI compliance can be provided. The percentage of renewable carbon according to ASTM D6866 (calculated) is 100%.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	1.9 % Show Supplier Material materials with Absorción de agua of 1.9 %	Sim. to ISO 62
Bio-based content	100 % Show Supplier Material materials with Bio-based content of 100 %
Densidad	1.02 g/cm³ Show Supplier Material materials with Densidad of 1.02 g/cm³	ISO 1183	dry
Índice límite de óxigeno	25 % Show Supplier Material materials with Índice límite de óxigeno of 25 %	ISO 4589-1/-2	dry

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		71 [-] Show Supplier Material materials with Dureza Shore D of 71 [-]	dry	ISO 7619-1	15 seconds
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield		5 % Show Supplier Material materials with Elongation at yield of 5 %	cond.	ISO 527-1/-2
Módulo elástico		1.2 GPa Show Supplier Material materials with Módulo elástico of 1.2 GPa	cond.	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	13 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 13 kJ/m²	cond.	ISO 179/1eA
	23 °C	15 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 15 kJ/m²	cond.	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	186 °C Show Supplier Material materials with Temperatura de fusión of 186 °C	dry	ISO 11357-1/-3	10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Rigidez dieléctrica	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	cond.	IEC 60243-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	6 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 6 cm³/10min	dry	ISO 1133	235°C/10kg

Technological properties

Property

Application areas

Healthcare-Other,IV Bags

Certifications

USP Class VI

Processing methods

Injection Molding:

Melt temperature (°C) ISO 294: 260

Mold temperature (°C) ISO 10724: 50

Injection velocity (mm/s) ISO 294: -

Pressure at hold (MPa) ISO 294: 16

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-80°C.

Rilsan® BESVO A MED

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades