General
Property | Value | Condition | Testing Standard |
---|---|---|---|
Bio-based content | 97 % Show Supplier Material materials with Bio-based content of 97 % | ||
Densidad | 1.25 g/cm³ Show Supplier Material materials with Densidad of 1.25 g/cm³ | dry | ISO 1183 |
Mecánica
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Dureza Shore D | 77 [-] Show Supplier Material materials with Dureza Shore D of 77 [-] | dry | ISO 7619-1 | 15 seconds | |
Elongación | 9 % Show Supplier Material materials with Elongación of 9 % | cond. | ISO 527-1/-2 | ||
Límite elástico | 48 MPa Show Supplier Material materials with Límite elástico of 48 MPa | cond. | ISO 527-1/-2 | ||
Módulo elástico | 6.8 GPa Show Supplier Material materials with Módulo elástico of 6.8 GPa | cond. | ISO 527-1/-2 | ||
Resistencia a la tracción | 122 MPa Show Supplier Material materials with Resistencia a la tracción of 122 MPa | cond. | ISO 527-1/-2 | ||
Resistencia al choque, ensayo Charpy entallado | -30 °C | 18 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 18 kJ/m² | cond. | ISO 179/1eA | |
23 °C | 26 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 26 kJ/m² | cond. | ISO 179/1eA | ||
Resistencia al choque, ensayo Charpy no entallado | No Break at 23 and -30°C | cond. | ISO 179/1eU |
Aplicaciones térmicas
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Temperatura de fusión | 189 °C Show Supplier Material materials with Temperatura de fusión of 189 °C | dry | ISO 11357-1/-3 | 10°C/min |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Velocidad de flujo del volumen derretido | 9 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 9 cm³/10min | dry | ISO 1133 | 235°C/5kg |
Technological properties
Property | ||
---|---|---|
Application areas | Chemical Process Industry - Injection Molding | |
Fillers | 30% Glass Fiber | |
Processing methods | Injection Molding: |