Rilsan® BZM 7 O TL

Nombres alternativos y comerciales
PA11-GF8

Want to keep this datasheet? Save it now in your required format

Description

PA11, MHLR, 18-030, GF8

Rilsan® BZM 7 O TL is a fiberglass reinforced polyamide 11 produced from a renewable source. This natural grade is designed for injection. The percentage of renewable carbon according to ASTM D6866 (calculated) is 97%.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	97 % Show Supplier Material materials with Bio-based content of 97 %
Densidad	1.07 g/cm³ Show Supplier Material materials with Densidad of 1.07 g/cm³	dry	ISO 1183

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		71 [-] Show Supplier Material materials with Dureza Shore D of 71 [-]	dry	ISO 7619-1	15 seconds
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield		7 % Show Supplier Material materials with Elongation at yield of 7 %	cond.	ISO 527-1/-2
Módulo elástico		1.8 GPa Show Supplier Material materials with Módulo elástico of 1.8 GPa	cond.	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	12 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12 kJ/m²	cond.	ISO 179/1eA
	23 °C	22 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 22 kJ/m²	cond.	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	189 °C Show Supplier Material materials with Temperatura de fusión of 189 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.6 % Show Supplier Material materials with Contracción of 0.6 %	dry	ISO 294-4
	1 % Show Supplier Material materials with Contracción of 1 %	dry	ISO 294-4	Transverse
Velocidad de flujo del volumen derretido	20 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 20 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Application areas

Main applications:

Spring for quick connectors

Outsoles

Packaging: This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services.

Fillers

8% Glass Fiber

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 250°C / 270°C / 290°C.

Mold temperature : 40 - 90°C

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

Rilsan® BZM 7 O TL

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades