Rilsan® D40 NATURAL

Nombres alternativos y comerciales
PA11
Want to keep this datasheet? Save it now in your required format

Description

RILSAN® D40 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 27-31 µm.

RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes.

The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density.

RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation.

Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Absorción de agua

1.9 %

Show Supplier Material materials with Absorción de agua of 1.9 %

Sim. to ISO 62

Densidad

1.04 g/cm³

Show Supplier Material materials with Densidad of 1.04 g/cm³

ISO 1183

relative density

Median particles size

27 - 31 μm

Show Supplier Material materials with Median particles size of 27 - 31 μm

ISO 13320

Non Tap density

0.37 g/cm³

Show Supplier Material materials with Non Tap density of 0.37 g/cm³

ISO 1068

Aplicaciones térmicas

PropertyValueConditionTesting StandardComment

Temperatura de fusión

185 °C

Show Supplier Material materials with Temperatura de fusión of 185 °C

dry

ISO 11357-1/-3

10°C/min

Temperatura de reblandecimiento Vicat

160 °C

Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 160 °C

ISO 306

50°C/h 50N

Inflamabilidad

At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: V-2

Eléctrico

PropertyValueConditionTesting Standard

Rigidez dieléctrica

30 kV/mm

Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm

dry

IEC 60243-1

Surface resistivity

1e+14 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq

cond.

IEC 60093

Volume resistivity

1e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

dry

IEC 60093

Technological properties

Property
Application areas

Main applications:

  • Coil coating
  • Wood coating
  • Plastic coating

    Packaging: This grade is delivered in 20kg bag.

    Shelf Life** Five years from the date of delivery. For any use after this limit, please refer to our technical services.