Rilsan® D50 NATURAL

Nombres alternativos y comerciales
PA11
Want to keep this datasheet? Save it now in your required format

Description

RILSAN® D50 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 40-46 µm.

RILSAN® D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes.

The introduction of RILSAN® polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density.

RILSAN® polyamide powders are surface modifiers, specifically designed for texture creation.

Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using RILSAN® polyamide powders.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyValueTesting StandardComment

Absorción de agua

1 %

Show Supplier Material materials with Absorción de agua of 1 %

ISO 62-1

max. | for 24h

Densidad

1.04 g/cm³

Show Supplier Material materials with Densidad of 1.04 g/cm³

ISO 1183

relative density

Median particles size

40 - 46 μm

Show Supplier Material materials with Median particles size of 40 - 46 μm

ISO 13320

Non Tap density

0.37 g/cm³

Show Supplier Material materials with Non Tap density of 0.37 g/cm³

ISO 1068

Aplicaciones térmicas

PropertyValueConditionTesting Standard

Temperatura de fusión

186 °C

Show Supplier Material materials with Temperatura de fusión of 186 °C

dry

ISO 1218

Technological properties

Property
Application areas

Main applications:

  • Coil coating
  • Wood coating
  • Plastic coating

    Packaging: This grade is delivered in 20kg bag.

    Shelf Life** Five years from the date of delivery. For any use after this limit, please refer to our technical services.