Rilsan® MB 3610 NAT

Nombres alternativos y comerciales
PA11-I

Want to keep this datasheet? Save it now in your required format

Description

PA11-P, EHL, 22-002

Rilsan® MB 3610 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and specially designed for pneumatic applications. It combines very high flexibility with good impact resistance. The percentage of renewable carbon according to ASTM D6866 (calculated) is 59%.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	1.1 % Show Supplier Material materials with Absorción de agua of 1.1 %	Sim. to ISO 62
Bio-based content	59 % Show Supplier Material materials with Bio-based content of 59 %
Densidad	1.03 g/cm³ Show Supplier Material materials with Densidad of 1.03 g/cm³	ISO 1183	dry
Moisture absorption	0.45 % Show Supplier Material materials with Moisture absorption of 0.45 %	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Dureza Shore D		53 [-] Show Supplier Material materials with Dureza Shore D of 53 [-]	dry	ISO 7619-1	15 seconds
Módulo elástico		0.21 GPa Show Supplier Material materials with Módulo elástico of 0.21 GPa	cond.	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	cond.	ISO 179/1eA	No Break at 23°C
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	188 °C Show Supplier Material materials with Temperatura de fusión of 188 °C	dry	ISO 11357-1/-3	10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Volume resistivity	1.9e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1.9e+13 Ω·cm	dry	IEC 60093

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	4 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 4 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Application areas

Main applications:

Pneumatic tubing

Packaging: This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf life: Two years from the delivery. For any use above this limit, please refer to our technical services.

Processing methods

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.

Rilsan® MB 3610 NAT

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades