Rilsan® TIEFLEX S452 BLACK T6L

Nombres alternativos y comerciales
PA*

Want to keep this datasheet? Save it now in your required format

Description

Rilsan® TIEFLEX S452 BLACK T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.

Packaging:

This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	2.9 % Show Supplier Material materials with Absorción de agua of 2.9 %	Sim. to ISO 62
Densidad	1.09 g/cm³ Show Supplier Material materials with Densidad of 1.09 g/cm³	ISO 1183	dry
Moisture absorption	1.2 % Show Supplier Material materials with Moisture absorption of 1.2 %	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Elongación		50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield		31 % Show Supplier Material materials with Elongation at yield of 31 %	cond.	ISO 527-1/-2
Límite elástico		33 MPa Show Supplier Material materials with Límite elástico of 33 MPa	cond.	ISO 527-1/-2
Módulo elástico		0.515 GPa Show Supplier Material materials with Módulo elástico of 0.515 GPa	cond.	ISO 527-1/-2
		0.685 GPa Show Supplier Material materials with Módulo elástico of 0.685 GPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	-30 °C	6.5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 6.5 kJ/m²	cond.	ISO 179/1eA
	23 °C	95 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 95 kJ/m²	cond.	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	217 °C Show Supplier Material materials with Temperatura de fusión of 217 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	3.4 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 3.4 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Processing methods

Extrusion:

Typical melt temperature (min / recommended / max): 220°C / 230°C / 270°C

Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 80°C

Rilsan® TIEFLEX S452 BLACK T6L

Description

Ashby charts

Materiales de este proveedor

Propiedades