General
Property | Value | Testing Standard | Comment |
---|---|---|---|
Absorción de agua | 1.8 % Show Supplier Material materials with Absorción de agua of 1.8 % | DIN EN ISO 62 | 23°C | 50 % r.h. up to saturation |
Densidad | 1.31 g/cm³ Show Supplier Material materials with Densidad of 1.31 g/cm³ | ||
Densidad aparente | 0.64 g/cm³ Show Supplier Material materials with Densidad aparente of 0.64 g/cm³ | EN ISO 60 |
Mecánica
Property | Value | Testing Standard | Comment |
---|---|---|---|
Elongación | 2 % Show Supplier Material materials with Elongación of 2 % | DIN EN ISO 527-1 | 50 mm/min |
Módulo elástico | 18.5 GPa Show Supplier Material materials with Módulo elástico of 18.5 GPa | DIN EN ISO 527-1 | 50 mm/min |
Resistencia a la tracción | 200 MPa Show Supplier Material materials with Resistencia a la tracción of 200 MPa | DIN EN ISO 527-1 | 50 mm/min |
Resistencia al choque, ensayo Charpy no entallado | 40 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 40 kJ/m² | DIN EN ISO 179-1eU |
Aplicaciones térmicas
Property | Value | Testing Standard | Pressure | Comment | |||
---|---|---|---|---|---|---|---|
Coeficiente de dilatación térmica | 9e-06 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 9e-06 1/K | DIN EN ISO 11359-1/2 | at 70-120°C | ||||
1.2e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 1.2e-05 1/K | DIN EN ISO 11359-1/2 | at 23-45°C | |||||
7.8e-05 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 7.8e-05 1/K | DIN EN ISO 11359-1/2 | at 23-45°C, Transverse | |||||
0.000117 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.000117 1/K | DIN EN ISO 11359-1/2 | at 70-120°C, Transverse | |||||
Conductividad térmica | 0.7 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.7 W/(m·K) | DIN EN 821 | through-plane | ||||
1.1 W/(m·K) Show Supplier Material materials with Conductividad térmica of 1.1 W/(m·K) | DIN EN 821 | in-plane | |||||
Temperatura de flexión bajo carga | 255 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 255 °C | ISO-R 75 Method A | 1.8 MPa | ||||
263 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 263 °C | ISO-R 75 Method B | 0.45 MPa | |||||
Temperatura de fusión | 260 °C Show Supplier Material materials with Temperatura de fusión of 260 °C | DIN 53765 | |||||
Temperatura de transición del vidrio | 72 °C Show Supplier Material materials with Temperatura de transición del vidrio of 72 °C | DIN 53765 | |||||
Temperatura máx. de funcionamiento | 110 °C Show Supplier Material materials with Temperatura máx. de funcionamiento of 110 °C | Long | |||||
170 °C Show Supplier Material materials with Temperatura máx. de funcionamiento of 170 °C | Short | ||||||
Inflamabilidad | UL94 class HB, DIN IEC 60695-11-10 |
Eléctrico
Property | Value | Testing Standard |
---|---|---|
Volume resistivity | 52000 Ω·cm Show Supplier Material materials with Volume resistivity of 52000 Ω·cm | DIN EN ISO 3915 |
Rheological Properties
Property | Value | Testing Standard | Comment |
---|---|---|---|
Contracción | 0.36 % Show Supplier Material materials with Contracción of 0.36 % | DIN EN ISO 294-4 | |
1 % Show Supplier Material materials with Contracción of 1 % | DIN EN ISO 294-4 | Transverse | |
Velocidad de flujo de la masa derretida | 75 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 75 g/10min | DIN EN ISO 1133 | 280°C/5kg |
Velocidad de flujo del volumen derretido | 65 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 65 cm³/10min | DIN EN ISO 1133 | 280°C/5kg |
Technological properties
Property | ||
---|---|---|
Application areas | Automotive industry: Seat (bumper, roll), Steering, Gear (shift handle and bearings), electronics (radar) and Mechanical engineering | |
Color | Black | |
Fillers | Carbon Fiber and Solid Lubricants | |
Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 8, mould temperature (°C): 120, material temperature (°C): 300, cylinder/processing temperature (°C): 300 |