PA6G + OIL ISO-TECH

Nombres alternativos y comerciales
ISO-MID PA6G+Oil
Want to keep this datasheet? Save it now in your required format

Related Standards

Los datos sobre este material han sido proporcionados por ISO-TECH Kunststoff GmbH.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueComment

Absorción de agua

0.2 %

Show Supplier Material materials with Absorción de agua of 0.2 %

ISO 62

Coefficient of friction

0.3 [-]

Show Supplier Material materials with Coefficient of friction of 0.3 [-]

DIN 53375, C, Against dry running steel

Densidad

1.13 g/cm³

Show Supplier Material materials with Densidad of 1.13 g/cm³

ISO 1183

Mecánica

PropertyValueComment

Dureza Shore D

85 [-]

Show Supplier Material materials with Dureza Shore D of 85 [-]

DIN 53505

Elongación

50 %

Show Supplier Material materials with Elongación of 50 %

min., ISO 527

Elongation at yield

8 %

Show Supplier Material materials with Elongation at yield of 8 %

ISO 527

Hardness, Ball Indentation

150 MPa

Show Supplier Material materials with Hardness, Ball Indentation of 150 MPa

ISO 2039-1

Límite elástico

66 MPa

Show Supplier Material materials with Límite elástico of 66 MPa

ISO 527

Módulo elástico

3 GPa

Show Supplier Material materials with Módulo elástico of 3 GPa

ISO 527

Resistencia a desgarros

60 kN/m

Show Supplier Material materials with Resistencia a desgarros of 60 kN/m

ISO 527

Resistencia a la flexión

95 MPa

Show Supplier Material materials with Resistencia a la flexión of 95 MPa

ISO 178

Resistencia al choque, ensayo Charpy entallado

5 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m²

min., ISO 179

Resistencia al choque, ensayo Charpy no entallado

No break, ISO 179

Aplicaciones térmicas

PropertyValueComment

Coeficiente de dilatación térmica

8e-05 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 8e-05 1/K

DIN 53752

Conductividad térmica

0.37 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 0.37 W/(m·K)

DIN 52612

Temperatura máx. de funcionamiento

100 °C

Show Supplier Material materials with Temperatura máx. de funcionamiento of 100 °C

Longterm

Long

Short

Temperatura mín. de funcionamiento

-40 °C

Show Supplier Material materials with Temperatura mín. de funcionamiento of -40 °C

Longterm

Inflamabilidad

HB UL 94

Eléctrico

PropertyValueComment

Rigidez dieléctrica

50 kV/mm

Show Supplier Material materials with Rigidez dieléctrica of 50 kV/mm

VDE 0303

Surface resistivity

1e+14 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+14 Ω/sq

min., VDE 0303

Volume resistivity

1e+14 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+14 Ω·cm

min., VDE 0303

Índice de seguimiento comparativo

600 V

Show Supplier Material materials with Índice de seguimiento comparativo of 600 V

IEC 60112

Technological properties

Property
Application areas

Sliding parts, rollers and impact stressed parts

Certifications

RoHS,REACH