UHMWPE AST ISO-TECH

Nombres alternativos y comerciales
ISO-LEN® 1000 AST
Want to keep this datasheet? Save it now in your required format

Description

ISO-LEN® 1000 has been proven for many years in various fields of application. Due to its wide range of characteristics, this all-round material is being used in products in all areas of technology where particularly high demands on material are required. By adding additives, we also deliver PE-UHMW finished parts with antistatic properties (ISO-LEN® 1000 AST). The key features are:


  • High abrasion resistance
  • Low friction coefficient
  • Self-lubricating
  • Very high notched impact strength
  • Related Standards

    Los datos sobre este material han sido proporcionados por ISO-TECH Kunststoff GmbH.

    A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
    Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Propiedades

    General

    PropertyValueComment

    Absorción de agua

    0.01 %

    Show Supplier Material materials with Absorción de agua of 0.01 %

    max.

    Coefficient of friction

    0.12 [-]

    Show Supplier Material materials with Coefficient of friction of 0.12 [-]

    DIN 53375, A, Against dry running steel

    Densidad

    0.96 g/cm³

    Show Supplier Material materials with Densidad of 0.96 g/cm³

    max., ISO 1183

    Mecánica

    PropertyValueComment

    Dureza Shore D

    61 [-]

    Show Supplier Material materials with Dureza Shore D of 61 [-]

    ISO 868

    65 [-]

    Show Supplier Material materials with Dureza Shore D of 65 [-]

    ISO 868

    Elongación

    200 %

    Show Supplier Material materials with Elongación of 200 %

    min., ISO 527

    Hardness, Ball Indentation

    30 MPa

    Show Supplier Material materials with Hardness, Ball Indentation of 30 MPa

    min., ISO 2039-1

    Límite elástico

    20 MPa

    Show Supplier Material materials with Límite elástico of 20 MPa

    ISO 527

    Módulo elástico

    0.7 GPa

    Show Supplier Material materials with Módulo elástico of 0.7 GPa

    min., ISO 527

    Resistencia al choque, ensayo Charpy entallado

    80 kJ/m²

    Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 80 kJ/m²

    min., ISO 179

    Aplicaciones térmicas

    PropertyValueComment

    Conductividad térmica

    0.41 W/(m·K)

    Show Supplier Material materials with Conductividad térmica of 0.41 W/(m·K)

    DIN 52612

    Temperatura de fusión

    130 - 135 °C

    Show Supplier Material materials with Temperatura de fusión of 130 - 135 °C

    ISO 3146

    Temperatura máx. de funcionamiento

    80 °C

    Show Supplier Material materials with Temperatura máx. de funcionamiento of 80 °C

    Longterm

    Long

    Short

    Inflamabilidad

    HB UL 94

    Eléctrico

    PropertyValueComment

    Surface resistivity

    1e+09 Ω/sq

    Show Supplier Material materials with Surface resistivity of 1e+09 Ω/sq

    max., IEC 60243

    Volume resistivity

    1e+06 Ω·cm

    Show Supplier Material materials with Volume resistivity of 1e+06 Ω·cm

    max., IEC 60243

    Technological properties

    Property
    Application areas

    Sliding parts, chain guidance and sliding profiles

    Certifications

    Food Contact: FDA, RoHS,REACH

    UV resistance

    Partly