Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.3 g/cm³ Show Supplier Material materials with Densidad of 1.3 g/cm³ | ASTM D792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 1 % Show Supplier Material materials with Elongación of 1 % | ASTM D638 |
Impact strength, Izod notched, ASTM | 23.0 °C | 224 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 224 J/m | ASTM D256 |
Módulo de flexión | 23.0 °C | 17.33 GPa Show Supplier Material materials with Módulo de flexión of 17.33 GPa | ASTM D790 |
Módulo elástico | 23.0 °C | 58.26 GPa Show Supplier Material materials with Módulo elástico of 58.26 GPa | ASTM D790 |
Resistencia a la flexión | 23.0 °C | 427 MPa Show Supplier Material materials with Resistencia a la flexión of 427 MPa | ASTM D790 |
Resistencia a la tracción | 23.0 °C | 289 MPa Show Supplier Material materials with Resistencia a la tracción of 289 MPa | ASTM D638 |
Aplicaciones térmicas
| Property | Value | Comment | |
|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 252 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 252 °C | ASTM D648 | |
Inflamabilidad | HB ASTM D635, for 1.5mm | ||
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.1 - 0.3 % Show Supplier Material materials with Contracción of 0.1 - 0.3 % | ASTM D955, (1/8 in (3.2 mm)section) |
Technological properties
| Property | ||
|---|---|---|
| Application areas | For the main wing of the aircraft, Duck wing, Stable wing nacelle and other aerospace fields | |
| Color | Black | |
| Fillers | 40% Long Carbon Fiber | |
| Processing methods | Injection Moulding. Injection Pressure 69 - 124 MPa, Melt Temperature 277 - 299 °C, Mould temperature 90 - 120 °C, Pre-drying 4 hrs @ 90 - 110°C, Moisture Content 0.2%, Dew Point -18°C | |