DIN 1725-1 Grade 3.3354 H14

Want to keep this datasheet? Save it now in your required format

Description

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. AlMg5 has the highest Mg content of the standardized AlMg alloys, so it is badly cold formable, but the strength is the highest, so that the employment is possible for statically more highly loaded constructions. The alloy is suitable for a splinter-giving machinig on automats. It possesses sensitivity to intergranular corrosion. By a purposeful heat treatment and/or by additive of Mn or Cr the inclination to the intergranular corrosion can be reduced. Application: In the optics, in the automobile engineering for body parts, in mechanical engineering (turned parts). For joining elements (solid rivets, blind rivets, riveting nuts and screws). In the building industry for carrying constructions as well as in shipbuilding considering the sensitivity to corrosion.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.64 g/cm³ Show Material materials with Densidad of 2.64 g/cm³	H14	WL 3.3354	Wire
	20.0 °C	2.64 g/cm³ Show Material materials with Densidad of 2.64 g/cm³	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	80.0 [-] Show Material materials with Dureza Brinell of 80.0 [-]	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Elongación	-196.0 °C	33.0 % Show Material materials with Elongación of 33.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	-73.0 °C	25.0 % Show Material materials with Elongación of 25.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	20.0 °C	2.0 % Show Material materials with Elongación of 2.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire	A100
	20.0 °C	5.0 % Show Material materials with Elongación of 5.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire	A10
	20.0 °C	6.0 % Show Material materials with Elongación of 6.0 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube
	20.0 °C	18.5 % Show Material materials with Elongación of 18.5 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
Módulo de cizallamiento	20.0 °C	27.0 GPa Show Material materials with Módulo de cizallamiento of 27.0 GPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Módulo elástico		71.0 GPa Show Material materials with Módulo elástico of 71.0 GPa	H14	WL 3.3354	Wire
	20.0 °C	67.0 - 72.0 GPa Show Material materials with Módulo elástico of 67.0 - 72.0 GPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	-196.0 °C	495.0 MPa Show Material materials with Resistencia a la tracción of 495.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
	-73.0 °C	340.0 MPa Show Material materials with Resistencia a la tracción of 340.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354
		300.0 - 360.0 MPa Show Material materials with Resistencia a la tracción of 300.0 - 360.0 MPa	H14	WL 3.3354	Wire
	20.0 °C	280.0 MPa Show Material materials with Resistencia a la tracción of 280.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube
	20.0 °C	310.0 MPa Show Material materials with Resistencia a la tracción of 310.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Wire
	20.0 °C	330.0 MPa Show Material materials with Resistencia a la tracción of 330.0 MPa	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		904.0 J/(kg·K) Show Material materials with Calor específico of 904.0 J/(kg·K)	H14	WL 3.3354	Wire
	20.0 °C	904.0 J/(kg·K) Show Material materials with Calor específico of 904.0 J/(kg·K)	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Coeficiente de dilatación térmica	-50.0 °C	2.25e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.25e-05 1/K	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	20 °C	2.31e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.31e-05 1/K	H14	WL 3.3354	Wire
	100 °C	2.31e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.31e-05 1/K	H14	WL 3.3354	Wire
	100.0 °C	2.41e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.41e-05 1/K	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	200.0 °C	2.51e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.51e-05 1/K	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	300.0 °C	2.61e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.61e-05 1/K	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Conductividad térmica	20.0 °C	110.0 - 140.0 W/(m·K) Show Material materials with Conductividad térmica of 110.0 - 140.0 W/(m·K)	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Temperatura de fusión		565.0 - 640.0 °C Show Material materials with Temperatura de fusión of 565.0 - 640.0 °C	H14	WL 3.3354	Wire
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica	20.0 °C	15000000.0 - 19000000.0 S/m Show Material materials with Conductividad eléctrica of 15000000.0 - 19000000.0 S/m	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Resistividad eléctrica		5.26e-08 - 6.67e-08 Ω·m Show Material materials with Resistividad eléctrica of 5.26e-08 - 6.67e-08 Ω·m	H14	WL 3.3354	Wire

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.1 % Show Material materials with Cobre of 0.1 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Cromo	0.2 % Show Material materials with Cromo of 0.2 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Hierro	0.5 % Show Material materials with Hierro of 0.5 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
	0.50 % Show Material materials with Hierro of 0.50 %	H14	WL 3.3354	Wire
Magnesio	4.5 - 5.6 % Show Material materials with Magnesio of 4.5 - 5.6 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Manganeso	0.1 - 0.6 % Show Material materials with Manganeso of 0.1 - 0.6 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Silicona	0.4 % Show Material materials with Silicona of 0.4 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Titanio	0.2 Show Material materials with Titanio of 0.2	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	H14	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod, Tube, Wire

Technological properties

Property

Workability

Good workability.