DIN 1725-1 Grade 3.0615 T3

Want to keep this datasheet? Save it now in your required format

Description

The material AlMgSiPb is a free-cutting alloy (boring and turning quality). It is warm and cold hardenable. Breaking the splinter is caused by the additive of Pb, and thus a troublefree splinter removal is possible with relatively high cutting performance. From the standardised free-cutting steel alloys this has to exhibit the smallest strength grade (F20 and/or F28), is however as only without surface protection corrosion resistant. It is suitable for a decorative surface treatment such as an anodising or a dyeing. The weldability is good. Heat treatment for hardening: solution annealing: 520 to 530 °C, quenching in water to 65 °C cold ageing: 5 to 8 at ambient temperature warm ageing: 4 to 16 h at 155 to 190 °C

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad	20.0 °C	2.75 g/cm³ Show Material materials with Densidad of 2.75 g/cm³	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 6000 Series Aluminium
Dureza Brinell	20.0 °C	60.0 [-] Show Material materials with Dureza Brinell of 60.0 [-]	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Elongación	20.0 °C	8.0 % Show Material materials with Elongación of 8.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod	A10
	20.0 °C	10.0 % Show Material materials with Elongación of 10.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Tube	A10
	20.0 °C	10.0 % Show Material materials with Elongación of 10.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Tube
Módulo de cizallamiento		26.0 - 26.5 GPa Show Material materials with Módulo de cizallamiento of 26.0 - 26.5 GPa				Typical for Wrought 6000 Series Aluminium
Módulo elástico		70.0 GPa Show Material materials with Módulo elástico of 70.0 GPa				Typical for Wrought 6000 Series Aluminium
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 6000 Series Aluminium
Resistencia a la tracción	20.0 °C	200.0 MPa Show Material materials with Resistencia a la tracción of 200.0 MPa	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		887.0 - 963.0 J/(kg·K) Show Material materials with Calor específico of 887.0 - 963.0 J/(kg·K)				Typical for Wrought 6000 Series Aluminium
Coeficiente de dilatación térmica	100.0 °C	2.3e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3e-05 1/K	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Conductividad térmica	20.0 °C	163.0 - 186.0 W/(m·K) Show Material materials with Conductividad térmica of 163.0 - 186.0 W/(m·K)	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Temperatura de fusión		555.0 - 655.0 °C Show Material materials with Temperatura de fusión of 555.0 - 655.0 °C				Typical for Wrought 6000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	24000000.0 - 28000000.0 S/m Show Material materials with Conductividad eléctrica of 24000000.0 - 28000000.0 S/m	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Resistividad eléctrica		2.9e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 2.9e-08 - 5e-08 Ω·m				Typical for Wrought 6000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Bismuto	0.7 Show Material materials with Bismuto of 0.7	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Cobre	0.1 Show Material materials with Cobre of 0.1	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Cromo	0.3 Show Material materials with Cromo of 0.3	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Hierro	0.5 Show Material materials with Hierro of 0.5	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Magnesio	0.6 - 1.2 % Show Material materials with Magnesio of 0.6 - 1.2 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Manganeso	0.4 - 1.0 % Show Material materials with Manganeso of 0.4 - 1.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Plomo	0.4 - 2.0 % Show Material materials with Plomo of 0.4 - 2.0 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Silicona	0.6 - 1.4 % Show Material materials with Silicona of 0.6 - 1.4 %	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Titanio	0.2 Show Material materials with Titanio of 0.2	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube
Zinc	0.3 Show Material materials with Zinc of 0.3	T3	DIN 1725-1, EN 573-3, EN 573-4	Rod, Tube

Technological properties

Property

Workability

Excellent workability.

Looking for suppliers of this material? Click to see 2 supplier of DIN 1725-1 Grade 3.0615 T3 on Matmatch