EN 10277-5 Grade 42CrMoS4 cold drawn or turned and quenched and tempered

View suppliers (5)
Want to keep this datasheet? Save it now in your required format

Description

Steel 42 CrMoS 4 is suitable for high loaded parts of high wear resistance and very favorable core qualities as well as enhanced workability in vehicle manufacturing, engine and machine engineering (e.g. crankshafts, pinions, balancer shafts). The steel has a high specific static and dynamic load resistance. Lowest application temp. -40 °C.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Densidad of 7.8 - 7.9 g/cm³

Typical for Chromium Molybdenum Steel

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

20.0 °C

0.28 [-]

Show Material materials with Coeficiente de Poisson of 0.28 [-]

Elongación

20.0 °C

10 - 12 %

Show Material materials with Elongación of 10 - 12 %

Estricción

20.0 °C

40 - 50 %

Show Material materials with Estricción of 40 - 50 %

Límite elástico

20.0 °C

650 - 900 MPa

Show Material materials with Límite elástico of 650 - 900 MPa

Módulo elástico

23.0 °C

200 - 215 GPa

Show Material materials with Módulo elástico of 200 - 215 GPa

Typical for Chromium Molybdenum Steel

Resistencia a la tracción

20.0 °C

900 - 1300 MPa

Show Material materials with Resistencia a la tracción of 900 - 1300 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

448 - 502 J/(kg·K)

Show Material materials with Calor específico of 448 - 502 J/(kg·K)

Typical for Chromium Molybdenum Steel

Coeficiente de dilatación térmica

23.0 °C

1.1E-5 - 1.4E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.1E-5 - 1.4E-5 1/K

Typical for Chromium Molybdenum Steel

Conductividad térmica

23.0 °C

36 - 43 W/(m·K)

Show Material materials with Conductividad térmica of 36 - 43 W/(m·K)

Typical for Chromium Molybdenum Steel

Temperatura de fusión

1382 - 1529 °C

Show Material materials with Temperatura de fusión of 1382 - 1529 °C

Typical for Chromium Molybdenum Steel

Temperatura máx. de funcionamiento, largo

-40 - 0 °C

Show Material materials with Temperatura máx. de funcionamiento, largo of -40 - 0 °C

Chemical properties

PropertyValue

Azufre

0.02 - 0.035 %

Show Material materials with Azufre of 0.02 - 0.035 %

Carbono

0.38 - 0.45 %

Show Material materials with Carbono of 0.38 - 0.45 %

Cromo

0.9 - 1.2 %

Show Material materials with Cromo of 0.9 - 1.2 %

Fósforo

0.04 %

Show Material materials with Fósforo of 0.04 %

Manganeso

0.6 - 0.9 %

Show Material materials with Manganeso of 0.6 - 0.9 %

Molibdeno

0.15 - 0.3 %

Show Material materials with Molibdeno of 0.15 - 0.3 %

Silicona

0.4 %

Show Material materials with Silicona of 0.4 %