DIN 1725-1 Grade 3.3537 F22

Want to keep this datasheet? Save it now in your required format

Description

With AlMg2,7Mn a press effect arises with products of extruding, which causes noticeable strength increases in press direction. This feature is likewise a consequence of the Mn-addition like the increase of the heat resistance. AlMg2,7Mn can be used due to the relatively good physical properties also for statically loaded constructions. The alloy is characterised by a good corrosion resistance. It is sea water steady and steady against saline atmosphere. With the Mg content the strength increases, while the cold forming capacity decreases. The material is nature hard, i.e. that only by a cold forming, however not by a purposeful heat treatment a strength increase can be attained. The splinter-giving workability and the weldability are improved with increasing Mg content. The alloy Al2,7Mn is standardised as semi-finished material only as sheet metal or strip, thickness > 0,35 mm (DIN 1745) Application: In the apparatus engineering for receivers according to VdTUEV-Werkstoffblaetter (cold carburetor, liquid air separation), for tanks for very low-temperatures and for temperatures to 250 °C. In the automobile engineering for silo and tank trucks, dump truck hollows, buses, cool and air conditioning systems, in the building industry for carrying constructions and for thermal insulation as well as in food industry for commercial devices.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Usos

Sistemas de fluido

Almacenamiento de fluidos

Recipientes de presión

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards
Densidad	20.0 °C	2.68 g/cm³ Show Material materials with Densidad of 2.68 g/cm³	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386

Mecánica

Property	Temperature	Value	Condition	Related Standards	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]			Typical for Wrought 5000 Series Aluminium
Elongación	-196.0 °C	39.0 % Show Material materials with Elongación of 39.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	-80.0 °C	30.0 % Show Material materials with Elongación of 30.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	-28.0 °C	27.0 % Show Material materials with Elongación of 27.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	20.0 °C	25.0 % Show Material materials with Elongación of 25.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	100.0 °C	21.0 % Show Material materials with Elongación of 21.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	150.0 °C	50.0 % Show Material materials with Elongación of 50.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	200.0 °C	60.0 % Show Material materials with Elongación of 60.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	260.0 °C	80.0 % Show Material materials with Elongación of 80.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	315.0 °C	110.0 % Show Material materials with Elongación of 110.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	370.0 °C	130.0 % Show Material materials with Elongación of 130.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Módulo de cizallamiento	20.0 °C	27.0 Show Material materials with Módulo de cizallamiento of 27.0	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Módulo elástico	20.0 °C	72.0 Show Material materials with Módulo elástico of 72.0	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m			Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	-196.0 °C	370.0 MPa Show Material materials with Resistencia a la tracción of 370.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	-80.0 °C	260.0 MPa Show Material materials with Resistencia a la tracción of 260.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	-28.0 °C	250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	20.0 °C	250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	100.0 °C	250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	150.0 °C	200.0 MPa Show Material materials with Resistencia a la tracción of 200.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	200.0 °C	150.0 MPa Show Material materials with Resistencia a la tracción of 150.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	260.0 °C	115.0 MPa Show Material materials with Resistencia a la tracción of 115.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	315.0 °C	75.0 MPa Show Material materials with Resistencia a la tracción of 75.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	370.0 °C	40.0 MPa Show Material materials with Resistencia a la tracción of 40.0 MPa	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Comment
Calor específico	20.0 °C	900.0 J/(kg·K) Show Material materials with Calor específico of 900.0 J/(kg·K)	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Coeficiente de dilatación térmica	-50.0 °C	2.19e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.19e-05 1/K	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	100.0 °C	2.37e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.37e-05 1/K	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	200.0 °C	2.46e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.46e-05 1/K	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
	300.0 °C	2.56e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.56e-05 1/K	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Conductividad térmica	20.0 °C	150.0 Show Material materials with Conductividad térmica of 150.0	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C			Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C			Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Comment
Conductividad eléctrica	20.0 °C	21000000.0 Show Material materials with Conductividad eléctrica of 21000000.0	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m			Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards
Cobre	0.1 Show Material materials with Cobre of 0.1	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Cromo	0.05 - 0.2 % Show Material materials with Cromo of 0.05 - 0.2 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Hierro	0.4 Show Material materials with Hierro of 0.4	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Magnesio	2.4 - 3.0 % Show Material materials with Magnesio of 2.4 - 3.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Manganeso	0.5 - 1.0 % Show Material materials with Manganeso of 0.5 - 1.0 %	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Silicona	0.25 Show Material materials with Silicona of 0.25	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Titanio	0.2 Show Material materials with Titanio of 0.2	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386
Zinc	0.25 Show Material materials with Zinc of 0.25	F22	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 386

Technological properties

Property

Workability

Good workability.