EN 10025-4 Grade S275M thermomechanically rolled

Want to keep this datasheet? Save it now in your required format

Description

S275M is a weldable fine-grained steel with a min. yield point of 275 N/mm². The steel is applicated in thermo mechanical rolled condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions. Subsequent heating above 580°C for thermo mechanical rolled products causes reduction of the strength properties. Application limit: at -20°C is warranted a notch impact energy of 40J (longitudinal test specimen). The carbon equivalent (by arrangement) amounts to: for nominal size: < 16 mm: 0,34% > 16 < 40 mm: 0,34% > 40 < 63 mm: 0,35% > 63 < 150 mm: 0,38% Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 12 mm can be warranted the following bending radius values: longitudinal: 2,5 x s transverse: 2 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Warm forming: thermo mechanical rolled products are unsuitable for warm forming. Surface refineability: S275M has to be suitable by arrangement for hot galnanizing and it has to meet the appropriate product quality requirements.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	7.8 g/cm³ Show Material materials with Densidad of 7.8 g/cm³	Typical for Steel

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]				Typical for Steel
Dureza Brinell		243 [-] Show Material materials with Dureza Brinell of 243 [-]				Predicted Value, Transverse
Elongación		18.1 % Show Material materials with Elongación of 18.1 %				Predicted Value, A200
		20.2 % Show Material materials with Elongación of 20.2 %				Predicted Value, A80
		20.7 % Show Material materials with Elongación of 20.7 %				Predicted Value, A80 Transverse
		21.0 % Show Material materials with Elongación of 21.0 %				Predicted Value, A5
		23.2 % Show Material materials with Elongación of 23.2 %				Predicted Value, Transverse
		24.2 % Show Material materials with Elongación of 24.2 %				Predicted Value, A50
	20 °C	24 % Show Material materials with Elongación of 24 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Estricción		43.2 % Show Material materials with Estricción of 43.2 %				Predicted Value
		44.2 % Show Material materials with Estricción of 44.2 %				Predicted Value, Transverse
Límite elástico		251.4 MPa Show Material materials with Límite elástico of 251.4 MPa				Predicted Value, RP1
		318.6 MPa Show Material materials with Límite elástico of 318.6 MPa				Predicted Value, RP1 Transverse
		327.9 MPa Show Material materials with Límite elástico of 327.9 MPa				Predicted Value, RP02
		352.3 MPa Show Material materials with Límite elástico of 352.3 MPa				Predicted Value, Transverse
		417.8 MPa Show Material materials with Límite elástico of 417.8 MPa				Predicted Value, RP05
		462.4 MPa Show Material materials with Límite elástico of 462.4 MPa				Predicted Value, RP02 Transverse
		485 MPa Show Material materials with Límite elástico of 485 MPa				Predicted Value, RP002
	20 °C	240 MPa Show Material materials with Límite elástico of 240 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	245 MPa Show Material materials with Límite elástico of 245 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	255 MPa Show Material materials with Límite elástico of 255 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	265 MPa Show Material materials with Límite elástico of 265 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	275 MPa Show Material materials with Límite elástico of 275 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Módulo de cizallamiento		80.1 GPa Show Material materials with Módulo de cizallamiento of 80.1 GPa				Predicted Value
Módulo elástico		190 - 210 GPa Show Material materials with Módulo elástico of 190 - 210 GPa				Typical for Steel
Resistencia a la tracción	20 °C	350 - 530 MPa Show Material materials with Resistencia a la tracción of 350 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 523 MPa Show Material materials with Resistencia a la tracción of 350 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 510 MPa Show Material materials with Resistencia a la tracción of 350 - 510 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 510 MPa Show Material materials with Resistencia a la tracción of 360 - 510 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	360 - 530 MPa Show Material materials with Resistencia a la tracción of 360 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 523 MPa Show Material materials with Resistencia a la tracción of 360 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 530 MPa Show Material materials with Resistencia a la tracción of 370 - 530 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 523 MPa Show Material materials with Resistencia a la tracción of 370 - 523 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	370 - 510 MPa Show Material materials with Resistencia a la tracción of 370 - 510 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Resistencia al cizallamiento		529.1 MPa Show Material materials with Resistencia al cizallamiento of 529.1 MPa				Predicted Value

Aplicaciones térmicas

Property	Value	Comment
Calor específico	456.8 J/(kg·K) Show Material materials with Calor específico of 456.8 J/(kg·K)	Predicted Value
Coeficiente de dilatación térmica	11.88 1/K Show Material materials with Coeficiente de dilatación térmica of 11.88 1/K	Predicted Value
Conductividad térmica	38.2 W/(m·K) Show Material materials with Conductividad térmica of 38.2 W/(m·K)	Predicted Value

Eléctrico

Property	Value	Comment
Conductividad eléctrica	7 S/m Show Material materials with Conductividad eléctrica of 7 S/m	Predicted Value
Resistividad eléctrica	35 Ω·m Show Material materials with Resistividad eléctrica of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminio	0.02 % Show Material materials with Aluminio of 0.02 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Azufre	0.025 % Show Material materials with Azufre of 0.025 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.03 % Show Material materials with Azufre of 0.03 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Carbono	0.13 % Show Material materials with Carbono of 0.13 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Cobre	0.55 % Show Material materials with Cobre of 0.55 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Cromo	0.3 % Show Material materials with Cromo of 0.3 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Fósforo	0.03 % Show Material materials with Fósforo of 0.03 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.035 % Show Material materials with Fósforo of 0.035 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Manganeso	1.5 % Show Material materials with Manganeso of 1.5 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Molibdeno	0.1 % Show Material materials with Molibdeno of 0.1 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.2 % Show Material materials with Molibdeno of 0.2 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Niobio	0.05 % Show Material materials with Niobio of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Nitrógeno	0.015 % Show Material materials with Nitrógeno of 0.015 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Níquel	0.3 % Show Material materials with Níquel of 0.3 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Silicona	0.5 % Show Material materials with Silicona of 0.5 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Titanio	0.05 % Show Material materials with Titanio of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Vanadio	0.08 % Show Material materials with Vanadio of 0.08 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 7 supplier of EN 10025-4 Grade S275M thermomechanically rolled on Matmatch

EN 10025-4 Grade S275M thermomechanically rolled

Description

Related Standards

Equivalent Materials

Ashby charts

There are 4 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades