DIN 17440 Grade X3CrTi17 heat treated

Want to keep this datasheet? Save it now in your required format

Description

The for pressure vessels approved material X3CrTi17, mat. no. 1.4510, has an similar corrosion behaviour like the X6Cr17 (1.4016). The steel is resistant to intercrystalline corrosion in the delivery condition and also in the welded condition. It is higher resistant to stress corrosion in hot lyes and weak chloride containing waters. Because of the Ti-content there is no danger for intercrystalline corrosion after welding. Thats why the steel is not high polishable. According DIN 17440 : 1996-09 it is used for flat products and rods and drawn wire and acc. DIN 17441 : 1997-02 for cold rolled strips and slit strips for pressure vessels. For the application acc. DIN 17440 : 1985-07 (X 6 CrTi 17) resp. acc. DIN EN 10088-1,-2,-3 : 1995-08 (X3CrTi17) applies: application for welded parts in washing machines (lye bins) and partially in the chemical apparatus engineering (weak acids), in the milk industry, food industry, brewery industry, textile industry and cosmetic industry.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	7.56 - 7.7 g/cm³ Show Material materials with Densidad of 7.56 - 7.7 g/cm³

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.3 [-] Show Material materials with Coeficiente de Poisson of 0.3 [-]	Typical for Ferritic Stainless Steel
Módulo de cizallamiento	23.0 °C	77 GPa Show Material materials with Módulo de cizallamiento of 77 GPa	Typical for Ferritic Stainless Steel
Módulo elástico	20.0 °C	218 - 220 GPa Show Material materials with Módulo elástico of 218 - 220 GPa
	100.0 °C	213 - 218 GPa Show Material materials with Módulo elástico of 213 - 218 GPa
	200.0 °C	206 - 212 GPa Show Material materials with Módulo elástico of 206 - 212 GPa
	300.0 °C	198 - 205 GPa Show Material materials with Módulo elástico of 198 - 205 GPa
	400.0 °C	190 - 197 GPa Show Material materials with Módulo elástico of 190 - 197 GPa
	500.0 °C	180 GPa Show Material materials with Módulo elástico of 180 GPa
	600.0 °C	167 GPa Show Material materials with Módulo elástico of 167 GPa
	700.0 °C	150 GPa Show Material materials with Módulo elástico of 150 GPa

Resistencia a la tracción	20.0 °C	650 MPa Show Material materials with Resistencia a la tracción of 650 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	450 - 460 J/(kg·K) Show Material materials with Calor específico of 450 - 460 J/(kg·K)
	100.0 °C	482 J/(kg·K) Show Material materials with Calor específico of 482 J/(kg·K)
	200.0 °C	506 J/(kg·K) Show Material materials with Calor específico of 506 J/(kg·K)
	300.0 °C	525 J/(kg·K) Show Material materials with Calor específico of 525 J/(kg·K)
	400.0 °C	547 J/(kg·K) Show Material materials with Calor específico of 547 J/(kg·K)
	500.0 °C	576 J/(kg·K) Show Material materials with Calor específico of 576 J/(kg·K)
	600.0 °C	616 J/(kg·K) Show Material materials with Calor específico of 616 J/(kg·K)
	Unlock all property charts
Coeficiente de dilatación térmica	20.0 °C	9.9E-6 1/K Show Material materials with Coeficiente de dilatación térmica of 9.9E-6 1/K
	100.0 °C	1E-5 - 1.03E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.03E-5 1/K
	200.0 °C	1E-5 - 1.08E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1E-5 - 1.08E-5 1/K
	300.0 °C	1.05E-5 - 1.12E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.12E-5 1/K
	400.0 °C	1.05E-5 - 1.16E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.05E-5 - 1.16E-5 1/K
	500.0 °C	1.1E-5 - 1.19E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.1E-5 - 1.19E-5 1/K
	600.0 °C	1.21E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.21E-5 1/K
	700.0 °C	1.24E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.24E-5 1/K
	800.0 °C	1.29E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.29E-5 1/K
	Unlock all property charts
Conductividad térmica	20.0 °C	16 - 25 W/(m·K) Show Material materials with Conductividad térmica of 16 - 25 W/(m·K)
	100.0 °C	17.2 W/(m·K) Show Material materials with Conductividad térmica of 17.2 W/(m·K)
	200.0 °C	18.6 W/(m·K) Show Material materials with Conductividad térmica of 18.6 W/(m·K)
	300.0 °C	20 W/(m·K) Show Material materials with Conductividad térmica of 20 W/(m·K)
	400.0 °C	21.2 W/(m·K) Show Material materials with Conductividad térmica of 21.2 W/(m·K)
	500.0 °C	22.3 W/(m·K) Show Material materials with Conductividad térmica of 22.3 W/(m·K)
	600.0 °C	23.3 W/(m·K) Show Material materials with Conductividad térmica of 23.3 W/(m·K)
	700.0 °C	24.1 W/(m·K) Show Material materials with Conductividad térmica of 24.1 W/(m·K)
	800.0 °C	25.5 W/(m·K) Show Material materials with Conductividad térmica of 25.5 W/(m·K)
	900.0 °C	26.9 W/(m·K) Show Material materials with Conductividad térmica of 26.9 W/(m·K)
	1000.0 °C	28.3 W/(m·K) Show Material materials with Conductividad térmica of 28.3 W/(m·K)
	Unlock all property charts
Difusividad térmica	20.0 °C	4.7 mm²/s Show Material materials with Difusividad térmica of 4.7 mm²/s
	100.0 °C	4.5 mm²/s Show Material materials with Difusividad térmica of 4.5 mm²/s
	200.0 °C	4.5 mm²/s Show Material materials with Difusividad térmica of 4.5 mm²/s
	300.0 °C	4.6 mm²/s Show Material materials with Difusividad térmica of 4.6 mm²/s
	400.0 °C	4.4 mm²/s Show Material materials with Difusividad térmica of 4.4 mm²/s
	500.0 °C	4.1 mm²/s Show Material materials with Difusividad térmica of 4.1 mm²/s
	600.0 °C	3.6 mm²/s Show Material materials with Difusividad térmica of 3.6 mm²/s
	Unlock all property charts
Temperatura de fusión		1425 - 1530 °C Show Material materials with Temperatura de fusión of 1425 - 1530 °C	Typical for Ferritic Stainless Steel

Eléctrico

Property	Temperature	Value
Resistividad eléctrica	20.0 °C	6E-7 - 9.06E-7 Ω·m Show Material materials with Resistividad eléctrica of 6E-7 - 9.06E-7 Ω·m
	100.0 °C	9.42E-7 Ω·m Show Material materials with Resistividad eléctrica of 9.42E-7 Ω·m
	200.0 °C	9.87E-7 Ω·m Show Material materials with Resistividad eléctrica of 9.87E-7 Ω·m
	300.0 °C	1.03E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.03E-6 Ω·m
	400.0 °C	1.08E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.08E-6 Ω·m
	500.0 °C	1.12E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.12E-6 Ω·m
	600.0 °C	1.18E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.18E-6 Ω·m
	700.0 °C	1.22E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.22E-6 Ω·m
	800.0 °C	1.24E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.24E-6 Ω·m
	900.0 °C	1.26E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.26E-6 Ω·m
	1000.0 °C	1.27E-6 Ω·m Show Material materials with Resistividad eléctrica of 1.27E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Azufre	0.015 - 0.03 % Show Material materials with Azufre of 0.015 - 0.03 %
Carbono	0.05 % Show Material materials with Carbono of 0.05 %
Cromo	16 - 18 % Show Material materials with Cromo of 16 - 18 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	1 % Show Material materials with Manganeso of 1 %
Silicona	1 % Show Material materials with Silicona of 1 %
Titanio	0.8 % Show Material materials with Titanio of 0.8 %