EN 10216-5 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)

View suppliers (8)
Want to keep this datasheet? Save it now in your required format

Description

Steel X1NiCrMoCuN25-20-7 (acc. to VdT_V-material specification 502 : 2001-06: X 1 NiCrMoCuN 25 20 6 ), material number 1.4529, is used acc. to VdT_V-Wbl 502 : 2001-06 for pressure vessels as per TRB 100 and AD-data sheet W 2 from -10 (and AD-data sheet W 10 for the form of manufacture sheet and Krupp-VDM-sectional and bar steel/forged parts from -196 deg.) to 400 deg. as well as in nuclear power engineering as far as nuclear rules or object-related specifications permit application for pressure vessels. The weldability is given for the metal-arc welding and gas-shielded welding. Preheating is not necessary. The intermediate layer temperature should not exceed 120 deg. Heat treatment (solution annealing and quenching) after the welding only in special cases necessary (special corrosion stress). As filler materials following metals are recommended: e.g. 2.4621 (EL-NiCr21Mo9Nb), 2.4831 (SG-NiCr21Mo9Nb), 2.4607 (SG-NiCr23Mo16 and 2.4611 (SG-NiMo16Cr16Ti). The two last-mentioned should preferred because of their corrosion properties. The material is cold and hot formable. To the material acc. to DIN EN 10216-5 : 2004-11 applies: X1NiCrMoCuN25-20-7 is the stronger Mo-alloyed variant of 1.4539. The steel shows a very high resistance to crevice corrosion, pitting corrosion as well as to stress corrosion caused by pitting corrosion. It has the highest steel pitting index. The material is resistant to intercrystalline corrosion, also in welded condition. Application in higher chloride contaminated media, such as in sulphuric and phosphoric acid as well as in offshore facilities. The steel is cold and warm formable. After cold forming at deformation degrees > 15 % as well as after warm forming has to be carried out a heat treatment (solution annealing at 1100 to 1180, quenching in water).

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

7.76 - 8.1 g/cm³

Show Material materials with Densidad of 7.76 - 8.1 g/cm³

Mecánica

PropertyTemperatureValueComment

Coeficiente de Poisson

23.0 °C

0.3 [-]

Show Material materials with Coeficiente de Poisson of 0.3 [-]

Typical for Austenitic Stainless Steel

Elongación

20.0 °C

35 %

Show Material materials with Elongación of 35 %

Elongación transversal

20.0 °C

30 %

Show Material materials with Elongación transversal of 30 %

Límite elástico Rp 0,2

20.0 °C

270 MPa

Show Material materials with Límite elástico Rp 0,2 of 270 MPa

50.0 °C

254 MPa

Show Material materials with Límite elástico Rp 0,2 of 254 MPa

100.0 °C

230 MPa

Show Material materials with Límite elástico Rp 0,2 of 230 MPa

150.0 °C

210 MPa

Show Material materials with Límite elástico Rp 0,2 of 210 MPa

200.0 °C

190 MPa

Show Material materials with Límite elástico Rp 0,2 of 190 MPa

250.0 °C

180 MPa

Show Material materials with Límite elástico Rp 0,2 of 180 MPa

300.0 °C

170 MPa

Show Material materials with Límite elástico Rp 0,2 of 170 MPa

350.0 °C

165 MPa

Show Material materials with Límite elástico Rp 0,2 of 165 MPa

400.0 °C

160 MPa

Show Material materials with Límite elástico Rp 0,2 of 160 MPa

Límite elástico Rp 1,0

20.0 °C

310 MPa

Show Material materials with Límite elástico Rp 1,0 of 310 MPa

50.0 °C

296 MPa

Show Material materials with Límite elástico Rp 1,0 of 296 MPa

100.0 °C

270 MPa

Show Material materials with Límite elástico Rp 1,0 of 270 MPa

150.0 °C

245 MPa

Show Material materials with Límite elástico Rp 1,0 of 245 MPa

200.0 °C

225 MPa

Show Material materials with Límite elástico Rp 1,0 of 225 MPa

250.0 °C

215 MPa

Show Material materials with Límite elástico Rp 1,0 of 215 MPa

300.0 °C

205 MPa

Show Material materials with Límite elástico Rp 1,0 of 205 MPa

350.0 °C

195 MPa

Show Material materials with Límite elástico Rp 1,0 of 195 MPa

400.0 °C

190 MPa

Show Material materials with Límite elástico Rp 1,0 of 190 MPa

Unlock all property charts

Límite elástico transversal Rp 0,2

20.0 °C

270 MPa

Show Material materials with Límite elástico transversal Rp 0,2 of 270 MPa

Límite elástico transversal Rp 1,0

20.0 °C

310 MPa

Show Material materials with Límite elástico transversal Rp 1,0 of 310 MPa

Módulo de cizallamiento

23.0 °C

77 GPa

Show Material materials with Módulo de cizallamiento of 77 GPa

Typical for Austenitic Stainless Steel

Módulo elástico

-100.0 °C

206 GPa

Show Material materials with Módulo elástico of 206 GPa

20.0 °C

195 - 196 GPa

Show Material materials with Módulo elástico of 195 - 196 GPa

100.0 °C

190 GPa

Show Material materials with Módulo elástico of 190 GPa

200.0 °C

182 GPa

Show Material materials with Módulo elástico of 182 GPa

300.0 °C

174 GPa

Show Material materials with Módulo elástico of 174 GPa

400.0 °C

166 GPa

Show Material materials with Módulo elástico of 166 GPa

500.0 °C

158 GPa

Show Material materials with Módulo elástico of 158 GPa

600.0 °C

150 GPa

Show Material materials with Módulo elástico of 150 GPa

700.0 °C

142 GPa

Show Material materials with Módulo elástico of 142 GPa

800.0 °C

134 GPa

Show Material materials with Módulo elástico of 134 GPa

900.0 °C

127 GPa

Show Material materials with Módulo elástico of 127 GPa

1000.0 °C

120 GPa

Show Material materials with Módulo elástico of 120 GPa

Unlock all property charts

Resistencia a la tracción

20.0 °C

600 - 800 MPa

Show Material materials with Resistencia a la tracción of 600 - 800 MPa

Resistencia a la tracción transversal

20.0 °C

600 - 800 MPa

Show Material materials with Resistencia a la tracción transversal of 600 - 800 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

-100.0 °C

440 J/(kg·K)

Show Material materials with Calor específico of 440 J/(kg·K)

20.0 °C

450 - 472 J/(kg·K)

Show Material materials with Calor específico of 450 - 472 J/(kg·K)

100.0 °C

487 J/(kg·K)

Show Material materials with Calor específico of 487 J/(kg·K)

200.0 °C

503 J/(kg·K)

Show Material materials with Calor específico of 503 J/(kg·K)

300.0 °C

512 J/(kg·K)

Show Material materials with Calor específico of 512 J/(kg·K)

400.0 °C

520 J/(kg·K)

Show Material materials with Calor específico of 520 J/(kg·K)

500.0 °C

530 J/(kg·K)

Show Material materials with Calor específico of 530 J/(kg·K)

600.0 °C

541 J/(kg·K)

Show Material materials with Calor específico of 541 J/(kg·K)

700.0 °C

551 J/(kg·K)

Show Material materials with Calor específico of 551 J/(kg·K)

800.0 °C

559 J/(kg·K)

Show Material materials with Calor específico of 559 J/(kg·K)

900.0 °C

565 J/(kg·K)

Show Material materials with Calor específico of 565 J/(kg·K)

1000.0 °C

571 J/(kg·K)

Show Material materials with Calor específico of 571 J/(kg·K)

Unlock all property charts

Coeficiente de dilatación térmica

-100.0 °C

1.49E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.49E-5 1/K

20.0 °C

1.61E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.61E-5 1/K

100.0 °C

1.58E-5 - 1.67E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.58E-5 - 1.67E-5 1/K

200.0 °C

1.61E-5 - 1.72E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.61E-5 - 1.72E-5 1/K

300.0 °C

1.65E-5 - 1.77E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.65E-5 - 1.77E-5 1/K

400.0 °C

1.69E-5 - 1.81E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.69E-5 - 1.81E-5 1/K

500.0 °C

1.73E-5 - 1.84E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.73E-5 - 1.84E-5 1/K

600.0 °C

1.88E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.88E-5 1/K

700.0 °C

1.91E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.91E-5 1/K

800.0 °C

1.94E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.94E-5 1/K

900.0 °C

1.97E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.97E-5 1/K

1000.0 °C

2E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 2E-5 1/K

Unlock all property charts

Conductividad térmica

20.0 °C

11.9 - 12 W/(m·K)

Show Material materials with Conductividad térmica of 11.9 - 12 W/(m·K)

100.0 °C

13.3 W/(m·K)

Show Material materials with Conductividad térmica of 13.3 W/(m·K)

200.0 °C

15.1 W/(m·K)

Show Material materials with Conductividad térmica of 15.1 W/(m·K)

300.0 °C

16.7 W/(m·K)

Show Material materials with Conductividad térmica of 16.7 W/(m·K)

400.0 °C

18.3 W/(m·K)

Show Material materials with Conductividad térmica of 18.3 W/(m·K)

500.0 °C

19.8 W/(m·K)

Show Material materials with Conductividad térmica of 19.8 W/(m·K)

600.0 °C

21.3 W/(m·K)

Show Material materials with Conductividad térmica of 21.3 W/(m·K)

700.0 °C

22.8 W/(m·K)

Show Material materials with Conductividad térmica of 22.8 W/(m·K)

800.0 °C

24.3 W/(m·K)

Show Material materials with Conductividad térmica of 24.3 W/(m·K)

900.0 °C

25.7 W/(m·K)

Show Material materials with Conductividad térmica of 25.7 W/(m·K)

1000.0 °C

27.1 W/(m·K)

Show Material materials with Conductividad térmica of 27.1 W/(m·K)

Unlock all property charts

Difusividad térmica

20.0 °C

3.3 mm²/s

Show Material materials with Difusividad térmica of 3.3 mm²/s

100.0 °C

3.4 mm²/s

Show Material materials with Difusividad térmica of 3.4 mm²/s

200.0 °C

3.7 mm²/s

Show Material materials with Difusividad térmica of 3.7 mm²/s

300.0 °C

4.1 mm²/s

Show Material materials with Difusividad térmica of 4.1 mm²/s

400.0 °C

4.3 mm²/s

Show Material materials with Difusividad térmica of 4.3 mm²/s

500.0 °C

4.5 mm²/s

Show Material materials with Difusividad térmica of 4.5 mm²/s

600.0 °C

4.7 mm²/s

Show Material materials with Difusividad térmica of 4.7 mm²/s

700.0 °C

5 mm²/s

Show Material materials with Difusividad térmica of 5 mm²/s

800.0 °C

5.4 mm²/s

Show Material materials with Difusividad térmica of 5.4 mm²/s

900.0 °C

5.7 mm²/s

Show Material materials with Difusividad térmica of 5.7 mm²/s

1000.0 °C

5.8 mm²/s

Show Material materials with Difusividad térmica of 5.8 mm²/s

Unlock all property charts

Temperatura de fusión

1230 - 1480 °C

Show Material materials with Temperatura de fusión of 1230 - 1480 °C

Typical for Austenitic Stainless Steel

Eléctrico

PropertyTemperatureValue

Resistividad eléctrica

20.0 °C

9.59E-7 - 1E-6 Ω·m

Show Material materials with Resistividad eléctrica of 9.59E-7 - 1E-6 Ω·m

100.0 °C

1.01E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.01E-6 Ω·m

200.0 °C

1.05E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.05E-6 Ω·m

300.0 °C

1.1E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.1E-6 Ω·m

400.0 °C

1.13E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.13E-6 Ω·m

500.0 °C

1.17E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.17E-6 Ω·m

600.0 °C

1.19E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.19E-6 Ω·m

700.0 °C

1.22E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.22E-6 Ω·m

800.0 °C

1.24E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.24E-6 Ω·m

900.0 °C

1.26E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.26E-6 Ω·m

1000.0 °C

1.28E-6 Ω·m

Show Material materials with Resistividad eléctrica of 1.28E-6 Ω·m

Unlock all property charts

Chemical properties

PropertyValue

Azufre

0.01 %

Show Material materials with Azufre of 0.01 %

Carbono

0.02 %

Show Material materials with Carbono of 0.02 %

Cobre

0.5 - 1.5 %

Show Material materials with Cobre of 0.5 - 1.5 %

Cromo

19 - 21 %

Show Material materials with Cromo of 19 - 21 %

Fósforo

0.03 %

Show Material materials with Fósforo of 0.03 %

Manganeso

1 %

Show Material materials with Manganeso of 1 %

Molibdeno

6 - 7 %

Show Material materials with Molibdeno of 6 - 7 %

Nitrógeno

0.15 - 0.25 %

Show Material materials with Nitrógeno of 0.15 - 0.25 %

Níquel

24 - 26 %

Show Material materials with Níquel of 24 - 26 %

Silicona

0.5 %

Show Material materials with Silicona of 0.5 %