EN 10139 Grade DC03 cold rolled, annealed

Want to keep this datasheet? Save it now in your required format

Description

The non-alloy steel DC03 acc. to DIN EN 10130 is suitable for cold forming of simple profile forms and components. Mechanical foldings are possible for thicknesses of up to 1,5 mm. To freedom of stretcher strains applies a period of 3 months after provision of the products for surface type A and B. Welding: DC03 is weldable by the following welding methods: MAG (metal-active-gas), plasma welding, laser welding, compression weld welding, resistance welding (spot, roll weld, buckle welding), arc welding. The steel acts as substrate for surface refined and coated bands and sheets. Application of DC03: household appliances industry, construction trade, car manufacturing, traffic system. Acc. to DIN EN 10139 DC03 is offered as cold rolled band or bar, cut in strength range HK270 to HK590. On welding of DC03in condition HK290 to HK590 has to be considered the potential influence to the mechanical properties

Related Standards

EN 10139

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	20.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Densidad of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	20.0 °C	0.29 [-] Show Material materials with Coeficiente de Poisson of 0.29 [-]	Typical for Low Carbon Steel
Dureza Vickers	20.0 °C	100 [-] Show Material materials with Dureza Vickers of 100 [-]
Elongación	20.0 °C	37 % Show Material materials with Elongación of 37 %
Elongación A50	20.0 °C	36 % Show Material materials with Elongación A50 of 36 %
Elongación A80	20.0 °C	34 % Show Material materials with Elongación A80 of 34 %
Límite elástico	20.0 °C	140 MPa Show Material materials with Límite elástico of 140 MPa
Módulo elástico	20.0 °C	200 - 215 GPa Show Material materials with Módulo elástico of 200 - 215 GPa	Typical for Low Carbon Steel
Resistencia a la tracción	20.0 °C	270 - 370 MPa Show Material materials with Resistencia a la tracción of 270 - 370 MPa

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	20.0 °C	1.32E-5 - 1.38E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.32E-5 - 1.38E-5 1/K	Typical for Low Carbon Steel
Temperatura de fusión		1480 - 1526 °C Show Material materials with Temperatura de fusión of 1480 - 1526 °C	Typical for Low Carbon Steel

Magnético

Property	Value	Comment
Temperatura de Curie	770 °C Show Material materials with Temperatura de Curie of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value
Azufre	0.035 % Show Material materials with Azufre of 0.035 %
Carbono	0.1 % Show Material materials with Carbono of 0.1 %
Fósforo	0.04 % Show Material materials with Fósforo of 0.04 %
Manganeso	0.45 % Show Material materials with Manganeso of 0.45 %

Looking for suppliers of this material? Click to see 25 supplier of EN 10139 Grade DC03 cold rolled, annealed on Matmatch

EN 10139 Grade DC03 cold rolled, annealed

Description

Related Standards

Equivalent Materials

Ashby charts

There are 22 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

Propiedades