OUR COOKIE DISCLAIMER
Matmatch uses cookies and similar technologies to improve your experience and measure your interactions with our website. We also use them to provide you more relevant information and improve our platform and search tools. If that’s okay, click “Accept all.” To change your preferences, click “Open cookie settings.” You will find more information about cookies on our privacy policy page.
Open cookie settings
Materiales
Categories
No estás conectado
Categories
Encontrar proveedores de metales
List Your Company
Case Studies
Tools
Sobre nosotros
The steel HX180YD (X=roll condition, Y=interstitial free, D=hot-dip coatable) is producible with the following coatings: - HX180YD+Z (plating Zn) with coating weights (double-sided) of 100, 140, 200, 225 and 275 g/m² (100 g approximate 7,1 µm per side) - HX180YD+ZF (plating Zn-Fe) with coating weights (double-sided) of 100 and 120 g/m² (100 g approximate 7,1 µm per side) - HX180YD+ZA (plating Zn-Al) with coating weights (double-sided) of 095, 130, 185, 200 and 255 g/m² (95 g approximate 7,2 µm per side) - HX180YD+AZ (plating Al-Zn) with coating weights (double-sided) of 100, 150 and 185 g/m² (100 g approximate 13,3 µm per side) - HX180YD+AS (plating Al-Si) with coating weights (double-sided) of 060 and 080 g/m² (100 g approximate 17 µm per side) The hot dip galvanizing refined flat products are available by arrangement on ordering with different coating weights (also per side). Following surface protection types can be delivered: chemical passivated, oiled, chemical passivated and oiled, sealed, phosphated, phosphated and oiled. Mechanical properties are warranted for a period of 3 months for Bake-hardening steels and for a period of 6 months after provision of the products for all other sorts. The same terms are valid for freedom from stretcher strains (surface type B and C). It is suitable for usual welding methods. For higher coating weights on welding are where approppriate necessary special measures. Furthermore suitability for joining by sticking as well as for application of organic coatings. Application: household appliances industry, construction trade, electrical industry, furniture industry, car industry.,The steel HX180YD (X=roll condition, Y=interstitial free, D=hot-dip coatable) is deliverable with the following coatings: - HX180YD+Z (plating Zn) with coating weights (double-sided) of 100, 140, 200, 225 and 275 g/m² (100 g approximate 7,1 µm per side) - HX180YD+ZF (plating Zn-Fe) with coating weights (double-sided) of 100 and 120 g/m² (100 g approximate 7,1 µm per side) - HX180YD+ZA (plating Zn-Al) with coating weights (double-sided) of 095, 130, 185, 200 and 255 g/m² (95 g approximate 7,2 µm per side) - HX180YD+AZ (plating Al-Zn) with coating weights (double-sided) of 100, 150 and 185 g/m² (100 g approximate 13,3 µm per side) - HX180YD+AS (plating Al-Si) with coating weights (double-sided) of 060 and 080 g/m² (100 g approximate 17 µm per side) The hot dip galvanizing refined flat products are available by arrangement on ordering with different coating weights (also per side). Following surface protection types can be delivered: chemical passivated, oiled, chemical passivated and oiled, sealed, phosphated, phosphated and oiled. Mechanical properties are warranted for a period of 6 months after provision. The same time is valid for freedom from stretcher strains (surface type B and C). It is suitable for usual welding methods. For higher coating weights on welding are where approppriate necessary special measures. Furthermore suitability for joining by sticking as well as for application of organic coatings. Application: household appliances industry, construction trade, electrical industry, furniture industry, car industry.
Los datos sobre este material han sido proporcionados por WIAM.
All categories
Suppliers with similar grades
4130 Steel (Chromoly): Properties and Applications
440C Stainless Steel: Properties, Processing and Application
7Cr17MoV vs 7Cr17 Stainless Steel
A Guide to Rebar Sizes – an overview of steel reinforcement bars
AISI 304 (1.4301) Stainless Steel
AISI 316 Stainless Steel: Specification and Datasheet
ASTM A1018
ASTM A108 Carbon and Alloy Steel Bars
ASTM A479 Stainless Steel
ASTM A53 Carbon Steel Pipes
ASTM A564 Stainless Steel Age Hardened
Advanced High Strength Steel: Nomenclature, Grades, and Applications
Alloy Steel: Properties, Processing and Applications
Austenitic Stainless Steel: Properties, Applications and Grades
Carbon Steel: Properties, Production, Examples and Applications
Cold Rolled Steels
Difference between AISI 316, AISI 316L and AISI 316LN Stainless Steel
Duplex Stainless Steel: Properties, Standards, and Applications
Electrical Steel: Properties, Types, Production, and Applications
Ferritic Stainless Steel: Properties, Grades, and Applications
Hot Rolled Steels
Introduction to Steel Grades
JIS SCM435 equivalent materials
Machinability, Castability, Formability, Hardenability and Weldability of Steel
Maraging Steel: Properties, Processing, and Applications
Martensitic Stainless Steel: Properties, Grades, and Applications
Materials Used in Bearings
Materials Used in Bridges
Stainless Steel: Properties, Production, Examples and Applications
Top Stainless Steel Suppliers in Europe
What is ASTM A182 Grade F6a Stainless Steel?
What is ASTM A36?
What is ASTM A53?
What is EN 10025 Grade S235JR?
List your company on Matmatch now and reach engineers around the world looking for such materials.
Request more informationMecánica
Property | Temperature | Value |
---|---|---|
Elongación A80 transversal | 20.0 °C | 34 % Show Material materials with Elongación A80 transversal of 34 % |
Límite elástico transversal Rp 0,2 | 20.0 °C | 180 - 240 MPa Show Material materials with Límite elástico transversal Rp 0,2 of 180 - 240 MPa |
Resistencia a la tracción transversal | 20.0 °C | 340 - 400 MPa Show Material materials with Resistencia a la tracción transversal of 340 - 400 MPa |
Chemical properties
Property | Value |
---|---|
Aluminio | 0.02 % Show Material materials with Aluminio of 0.02 % |
Azufre | 0.025 % Show Material materials with Azufre of 0.025 % |
Carbono | 0.01 % Show Material materials with Carbono of 0.01 % |
Fósforo | 0.06 % Show Material materials with Fósforo of 0.06 % |
Manganeso | 0.7 % Show Material materials with Manganeso of 0.7 % |
Niobio | 0.09 % Show Material materials with Niobio of 0.09 % |
Silicona | 0.1 - 0.15 % Show Material materials with Silicona of 0.1 - 0.15 % |
Titanio | 0.12 % Show Material materials with Titanio of 0.12 % |
MATMATCH
We connect engineers, product designers and procurement teams with the best materials and suppliers for their job.
EMPRESA
CONTÁCTANOS
Siebenbürger Str. 23, 86983 Lechbruck am See, Germany
© 2024 Plansee Composite Materials GmbH, All rights reserved.