EN 12163 Grade CuNi10Fe1Mn R280

View suppliers (4)
Want to keep this datasheet? Save it now in your required format

Description

CuNi10Fe1Mn (CW352H) is comparable to CuNi10Fe1Mn, mat. no. 2.0872, acc. to DIN 17664 : 1983-12. To the comparable DIN-mark applies: The material shows favorable specific strength values also at endurance loading and increased temperatures. Thermal conductivity of pure copper is strongly reduced by Ni, the electrical resistance strongly increases according to the Ni-content. Fe-addition increases the corrosion resistance. CuNi10Fe1Mn is resistant to seawater, alkaline saline solutions and non-oxidizing acids. warm forming: good cold forming: very good machinability: unfavorable hard soldering: very good soft soldering: very good gas-shielded welding: very good burnishing: good Application: For seawater pipilines, tubes and plates for all types of tubular heat-exchanger (condenser, cooler, seawater evaporators, high pressure feeder water heater) on ships, in power plants, seawater desalination plants, chemical and sugar factories.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

20.0 °C

8.9 g/cm³

Show Material materials with Densidad of 8.9 g/cm³

Mecánica

PropertyTemperatureValue

Dureza Vickers

20.0 °C

85 [-]

Show Material materials with Dureza Vickers of 85 [-]

Elongación

20.0 °C

20 - 30 %

Show Material materials with Elongación of 20 - 30 %

Límite elástico Rp 0,2

20.0 °C

90 - 110 MPa

Show Material materials with Límite elástico Rp 0,2 of 90 - 110 MPa

Límite elástico Rp 1,0

20.0 °C

125 MPa

Show Material materials with Límite elástico Rp 1,0 of 125 MPa

50.0 °C

125 MPa

Show Material materials with Límite elástico Rp 1,0 of 125 MPa

100.0 °C

118 MPa

Show Material materials with Límite elástico Rp 1,0 of 118 MPa

150.0 °C

114 MPa

Show Material materials with Límite elástico Rp 1,0 of 114 MPa

200.0 °C

109 MPa

Show Material materials with Límite elástico Rp 1,0 of 109 MPa

250.0 °C

104 MPa

Show Material materials with Límite elástico Rp 1,0 of 104 MPa

300.0 °C

99 MPa

Show Material materials with Límite elástico Rp 1,0 of 99 MPa

Módulo elástico

-253.0 °C

153 GPa

Show Material materials with Módulo elástico of 153 GPa

-195.0 °C

148 GPa

Show Material materials with Módulo elástico of 148 GPa

-100.0 °C

142 GPa

Show Material materials with Módulo elástico of 142 GPa

20.0 °C

130 GPa

Show Material materials with Módulo elástico of 130 GPa

50.0 °C

129 GPa

Show Material materials with Módulo elástico of 129 GPa

100.0 °C

128 GPa

Show Material materials with Módulo elástico of 128 GPa

150.0 °C

127 GPa

Show Material materials with Módulo elástico of 127 GPa

200.0 °C

125 GPa

Show Material materials with Módulo elástico of 125 GPa

250.0 °C

122 GPa

Show Material materials with Módulo elástico of 122 GPa

300.0 °C

121 GPa

Show Material materials with Módulo elástico of 121 GPa

Unlock all property charts

Resistencia a la tracción

20.0 °C

280 MPa

Show Material materials with Resistencia a la tracción of 280 MPa

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

20.0 °C

380 J/(kg·K)

Show Material materials with Calor específico of 380 J/(kg·K)

Coeficiente de dilatación térmica

23.0 °C

1.4E-5 - 1.8E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 1.4E-5 - 1.8E-5 1/K

Typical for Wrought Copper Nickel Grade

Conductividad térmica

20.0 °C

50.2 W/(m·K)

Show Material materials with Conductividad térmica of 50.2 W/(m·K)

Temperatura de fusión

915 - 1240 °C

Show Material materials with Temperatura de fusión of 915 - 1240 °C

Typical for Wrought Copper Nickel Grade

Chemical properties

PropertyValue

Azufre

0.05 %

Show Material materials with Azufre of 0.05 %

Carbono

0.05 %

Show Material materials with Carbono of 0.05 %

Cobalto

0.1 %

Show Material materials with Cobalto of 0.1 %

Estaño

0.03 %

Show Material materials with Estaño of 0.03 %

Fósforo

0.02 %

Show Material materials with Fósforo of 0.02 %

Hierro

1 - 2 %

Show Material materials with Hierro of 1 - 2 %

Manganeso

0.5 - 1 %

Show Material materials with Manganeso of 0.5 - 1 %

Níquel

9 - 11 %

Show Material materials with Níquel of 9 - 11 %

Plomo

0.02 %

Show Material materials with Plomo of 0.02 %

Zinc

0.5 %

Show Material materials with Zinc of 0.5 %