EN 12167 Grade CuNi1Si H140

Want to keep this datasheet? Save it now in your required format

Description

CuNi1Si, mat. No CW109C, is counted among hardenable, low alloyed copper alloys. To the comparable DIN-make CuNi1,5Si, mat. No 2.0853, acc. to DIN 17666 : 1983-12 applies: The material shows favorable electrical and thermal conductivity, corrosion resistance, high fatigue and creep resistance as well as favorable spring properties. CuNi1Si is in hardened condition resistant to stress corrosion. Temperature for removal of workhardening approximates 450°C. Strength still increases at low-temperature range. Processing properties: hot and cold forming: good machinability: moderately soft soldering: good hard soldering: moderately gas shielded welding: moderately burnishing: good Application: Particularly for aerial line material, such as clamps, mounting links, nuts, high-strength and corrosion resistant screws. Furthermore for wire ropes in electrical overhead line construction, bearing bushings, roller bearing cages, valve guide bushings and springs.

Related Standards

EN 12167

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	20.0 °C	8.8 - 8.9 g/cm³ Show Material materials with Densidad of 8.8 - 8.9 g/cm³

Mecánica

Property	Temperature	Value	Comment
Dureza Brinell	20.0 °C	140 - 190 [-] Show Material materials with Dureza Brinell of 140 - 190 [-]
Módulo elástico	23.0 °C	110 - 130 GPa Show Material materials with Módulo elástico of 110 - 130 GPa	Typical for Wrought Copper High Copper Alloy

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	20.0 °C	377 J/(kg·K) Show Material materials with Calor específico of 377 J/(kg·K)
Coeficiente de dilatación térmica	300.0 °C	1.68E-5 1/K Show Material materials with Coeficiente de dilatación térmica of 1.68E-5 1/K
Temperatura de fusión		855 - 1090 °C Show Material materials with Temperatura de fusión of 855 - 1090 °C	Typical for Wrought Copper High Copper Alloy

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	20.0 °C	2.20E+7 S/m Show Material materials with Conductividad eléctrica of 2.20E+7 S/m
Specific Electrical conductivity		38 % IACS Show Material materials with Specific Electrical conductivity of 38 % IACS

Chemical properties

Property	Value
Hierro	0.2 % Show Material materials with Hierro of 0.2 %
Manganeso	0.1 % Show Material materials with Manganeso of 0.1 %
Níquel	1 - 1.6 % Show Material materials with Níquel of 1 - 1.6 %
Plomo	0.02 % Show Material materials with Plomo of 0.02 %
Silicona	0.4 - 0.7 % Show Material materials with Silicona of 0.4 - 0.7 %

Looking for suppliers of this material? Click to see 2 supplier of EN 12167 Grade CuNi1Si H140 on Matmatch