General
Property | Temperature | Value |
---|---|---|
Densidad | 23.0 °C | 7.9 g/cm³ Show Supplier Material materials with Densidad of 7.9 g/cm³ |
Medidas
Property | Value |
---|---|
Ancho | 1350 - 2540 mm Show Supplier Material materials with Ancho of 1350 - 2540 mm |
Diámetro exterior | 450 - 910 mm Show Supplier Material materials with Diámetro exterior of 450 - 910 mm |
Diámetro interior | 400 - 730 mm Show Supplier Material materials with Diámetro interior of 400 - 730 mm |
Espesor | 150 - 230 mm Show Supplier Material materials with Espesor of 150 - 230 mm |
Longitud | 1750 - 3370 mm Show Supplier Material materials with Longitud of 1750 - 3370 mm |
Chemical properties
Property | Value |
---|---|
Azufre | 0 - 0.02 % Show Supplier Material materials with Azufre of 0 - 0.02 % |
Carbono | 0.33 - 0.4 % Show Supplier Material materials with Carbono of 0.33 - 0.4 % |
Cobre | 0 - 0.3 % Show Supplier Material materials with Cobre of 0 - 0.3 % |
Cromo | 1.2 - 1.5 % Show Supplier Material materials with Cromo of 1.2 - 1.5 % |
Fósforo | 0 - 0.03 % Show Supplier Material materials with Fósforo of 0 - 0.03 % |
Hierro | Balance |
Manganeso | 0.25 - 0.5 % Show Supplier Material materials with Manganeso of 0.25 - 0.5 % |
Molibdeno | 0.35 - 0.45 % Show Supplier Material materials with Molibdeno of 0.35 - 0.45 % |
Níquel | 3 - 3.5 % Show Supplier Material materials with Níquel of 3 - 3.5 % |
Silicona | 0.17 - 0.37 % Show Supplier Material materials with Silicona of 0.17 - 0.37 % |
Vanadio | 0.1 - 0.18 % Show Supplier Material materials with Vanadio of 0.1 - 0.18 % |
Technological properties
Property | ||
---|---|---|
Application areas | Steel ingots are applied for further processing by the methods of plastic deformation, rolling, forging, pressing, etc. | |
Processing methods | In technological processes of manufacturing are applied sand clays, CO2 process, air-set mold, die-casting. |