Molybdenum-Lanthanum Oxide Recrystallized (MLR)

Want to keep this datasheet? Save it now in your required format

Description

Small quantities of lanthanum oxide particles (0.3% to 0.7%) give the molybdenum a so-called stacked fiber structure. This special microstructure is stable at up to 2000°C. Molybdenum-lanthanum oxide is therefore also creep-resistant even under extreme conditions of use.

Los datos sobre este material han sido proporcionados por Plansee.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

Chemical properties

Property	Value	Comment
Lantano	0.3 - 0.7 % Show Supplier Material materials with Lantano of 0.3 - 0.7 %	as La₂O₃
Molibdeno	balance

Technological properties

Property
Application areas	This alloy is mostly machined to produce furnace components such as stranded and other wires, sintering and annealing boats or evaporator coils. In the lighting industry, molybdenum-lanthanum oxide is used, for example, for retaining and feed wires.

Molybdenum-Lanthanum Oxide Recrystallized (MLR)

Description

Ashby charts

Usos

Materiales de este proveedor

Casos de uso

Propiedades