Molybdenum Lanthanum Oxide Stress Relieved (MLS) Stress Relieved, Pickled Sheet

Want to keep this datasheet? Save it now in your required format

Description

Small quantities of lanthanum oxide particles (0.3% to 0.7%) give the molybdenum a so-called stacked fiber structure. This special microstructure is stable at up to 2000°C. Molybdenum-lanthanum oxide is therefore also creep-resistant even under extreme conditions of use.

Los datos sobre este material han sido proporcionados por Plansee.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

10.1 g/cm³

Show Supplier Material materials with Densidad of 10.1 g/cm³

Medidas

PropertyValue

Ancho

609.6 mm

Show Supplier Material materials with Ancho of 609.6 mm

Espesor

0.25 - 0.76 mm

Show Supplier Material materials with Espesor of 0.25 - 0.76 mm

Longitud

1981 mm

Show Supplier Material materials with Longitud of 1981 mm

Dimensions

Available dimensions (width x length x thickness, mm x mm x mm): 609.6 x 1981.2 x 0.254; 609.6 x 1981.2 x 0.381; 609.6 x 1981.2 x 0.508; 609.6 x 1981.2 x 0.762

Mecánica

PropertyTemperatureValue

Dureza Vickers

23.0 °C

270 [-]

Show Supplier Material materials with Dureza Vickers of 270 [-]

Chemical properties

PropertyValueComment

Aluminio

1E-4 %

Show Supplier Material materials with Aluminio of 1E-4 %

Cadmio

1E-4 %

Show Supplier Material materials with Cadmio of 1E-4 %

Carbono

1.3E-3 %

Show Supplier Material materials with Carbono of 1.3E-3 %

Cobre

2E-4 %

Show Supplier Material materials with Cobre of 2E-4 %

Cromo

3E-4 %

Show Supplier Material materials with Cromo of 3E-4 %

Hierro

5E-4 %

Show Supplier Material materials with Hierro of 5E-4 %

Lantano

0.52 - 0.62 %

Show Supplier Material materials with Lantano of 0.52 - 0.62 %

as La

Molibdeno

balance

Nitrógeno

1E-4 %

Show Supplier Material materials with Nitrógeno of 1E-4 %

Níquel

1E-4 %

Show Supplier Material materials with Níquel of 1E-4 %

Otro

0.61 - 0.73 %

Show Supplier Material materials with Otro of 0.61 - 0.73 %

as La₂O₃

Potasio

6E-4 %

Show Supplier Material materials with Potasio of 6E-4 %

Silicona

2E-4 %

Show Supplier Material materials with Silicona of 2E-4 %

Wolframio

0.02 %

Show Supplier Material materials with Wolframio of 0.02 %

Technological properties

Property
Application areas

This alloy is mostly machined to produce furnace components such as stranded and other wires, sintering and annealing boats or evaporator coils. In the lighting industry, molybdenum-lanthanum oxide is used, for example, for retaining and feed wires.