Tungsten-Copper Composite (W15Cu)

Want to keep this datasheet? Save it now in your required format

Description

WCu composites consist of a porous tungsten matrix infiltrated with approximately 10 - 40 percent by weight of copper. Tungsten-Copper is very resistant to arc erosion, exhibits good electrical conductivity, a high level of thermal conductivity and low thermal expansion.

Los datos sobre este material han sido proporcionados por Plansee.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

16.4 g/cm³

Show Supplier Material materials with Densidad of 16.4 g/cm³

Aplicaciones térmicas

PropertyTemperatureValue

Coeficiente de dilatación térmica

22.0 °C

7.3E-6 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 7.3E-6 1/K

Conductividad térmica

23.0 °C

215 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 215 W/(m·K)

Chemical properties

PropertyValue

Cobre

balance

Wolframio

15 %

Show Supplier Material materials with Wolframio of 15 %

Technological properties

Property
Application areas

WCu is used for the construction of high-voltage circuit breakers (marketed under the name Elmet®) and for erosion electrodes (marketed under the name Sparkal®). WCu composites are also used as base plates and heat spreaders in radar technology, optoelectronics and high frequency electronics.