RADILON D RV600RKC 306 BK

Nombres alternativos y comerciales
PA610-GF60

Want to keep this datasheet? Save it now in your required format

Description

PA610 60% glass fibre reinforced injection moulding grade. Heat stabilized. Black colour.

Suitable for parts requiring very high stiffness and good mechanical resistance, along with good resistance to hydrolysis. Product specifically intended for applications in civil and industrial water management sector. This grade is partially renewably-sourced (60% of base polymer by weight).

Equivalent Materials

PA610-GF60

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

FABRICANTE

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materiales de este proveedor

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Ver todos los materiales de este proveedor

Casos de uso

Webinar: Metal Replacement with Engineering Polymers

Propiedades

General

Property	Temperature	Value	Thickness	Testing Standard	Condition	Comment
Absorción de agua		1.3 % Show Supplier Material materials with Absorción de agua of 1.3 %	2 mm	ISO 62		immersion at 23°C
Densidad		1.66 g/cm³ Show Supplier Material materials with Densidad of 1.66 g/cm³		ISO 1183	dry
Moisture absorption	23 °C	0.5 % Show Supplier Material materials with Moisture absorption of 0.5 %	2 mm	ISO 62	50%RH

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Elongación		2.9 % Show Supplier Material materials with Elongación of 2.9 %	dry	ISO 527-2/1A	5mm/min
		3 % Show Supplier Material materials with Elongación of 3 %	50%RH	ISO 527-2/1A	5mm/min
Módulo de flexión		15.4 GPa Show Supplier Material materials with Módulo de flexión of 15.4 GPa	50%RH	ISO 178	2mm/min
		17 GPa Show Supplier Material materials with Módulo de flexión of 17 GPa	dry	ISO 178	2mm/min
Módulo elástico		17.2 GPa Show Supplier Material materials with Módulo elástico of 17.2 GPa	50%RH	ISO 527-2/1A	1mm/min
		19 GPa Show Supplier Material materials with Módulo elástico of 19 GPa	dry	ISO 527-2/1A	1mm/min
Resistencia a la flexión		320 MPa Show Supplier Material materials with Resistencia a la flexión of 320 MPa	50%RH	ISO 178	2mm/min
		340 MPa Show Supplier Material materials with Resistencia a la flexión of 340 MPa	dry	ISO 178	2mm/min
Resistencia a la tracción		190 MPa Show Supplier Material materials with Resistencia a la tracción of 190 MPa	50%RH	ISO 527-2/1A	5mm/min
		220 MPa Show Supplier Material materials with Resistencia a la tracción of 220 MPa	dry	ISO 527-2/1A	5mm/min
Resistencia al choque, ensayo Charpy entallado	23 °C	18 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 18 kJ/m²	dry	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	23 °C	100 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m²	dry	ISO 179/1eU
	23 °C	105 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 105 kJ/m²	50%RH	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Testing Standard	Comment
Temperatura de flexión bajo carga	190 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 190 °C	ISO 75/2Af	8.00 MPa
	215 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 215 °C	ISO 75/2Af	1.80 MPa
Temperatura de fusión	220 °C Show Supplier Material materials with Temperatura de fusión of 220 °C	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	215 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 215 °C	ISO 306	1.00E+12mm
Inflamabilidad	Thickness tested (mm): 3, Class: HB, Standard: UL 94

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Surface resistivity	1e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq	dry	IEC 60093	500V
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	50%RH	IEC 60093	500V
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 60093	500V

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.2 % Show Supplier Material materials with Contracción of 0.2 %	280/90/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]
	0.3 % Show Supplier Material materials with Contracción of 0.3 %	280/90/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse

Technological properties

Property
Additives	Release agent
Certifications	RoHS 2011/65/UE
Color	Black
Fillers	60% Glass Fiber
Processing methods	Injection Molding