RADILON D 40EP25ZW 7037 BL

Nombres alternativos y comerciales
PA610
Want to keep this datasheet? Save it now in your required format

Description

PA610 flexible, high viscosity extrusion grade. Toughened and plasticized. Heat stabilized. Blue colour.

Suitable for extrusion of pipes, profiles and cable jackets. Good impact resistance also at low temperatures. This grade is partially renewably-sourced (60% of base polymer by weight).

Equivalent Materials

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueThicknessTesting StandardConditionComment

Absorción de agua

2 %

Show Supplier Material materials with Absorción de agua of 2 %

2 mm

ISO 62

immersion at 23°C

Densidad

1.04 g/cm³

Show Supplier Material materials with Densidad of 1.04 g/cm³

ISO 1183

dry

Moisture absorption

23 °C

0.9 %

Show Supplier Material materials with Moisture absorption of 0.9 %

2 mm

ISO 62

50%RH

Mecánica

PropertyTemperatureValueConditionTesting StandardComment

Elongación

50 %

Show Supplier Material materials with Elongación of 50 %

dry, 50%RH

ISO 527-2/1A

min. | 5mm/min

Modulus at 50% elongation

0.024 GPa

Show Supplier Material materials with Modulus at 50% elongation of 0.024 GPa

50%RH

ISO 527-2/1A

0.027 GPa

Show Supplier Material materials with Modulus at 50% elongation of 0.027 GPa

dry

ISO 527-2/1A

Módulo al 100 % de elongación

0.023 GPa

Show Supplier Material materials with Módulo al 100 % de elongación of 0.023 GPa

50%RH

ISO 527-2/1A

0.028 GPa

Show Supplier Material materials with Módulo al 100 % de elongación of 0.028 GPa

dry

ISO 527-2/1A

Módulo de flexión

0.33 GPa

Show Supplier Material materials with Módulo de flexión of 0.33 GPa

50%RH

ISO 178

2mm/min

0.48 GPa

Show Supplier Material materials with Módulo de flexión of 0.48 GPa

dry

ISO 178

2mm/min

Módulo elástico

0.38 GPa

Show Supplier Material materials with Módulo elástico of 0.38 GPa

50%RH

ISO 527-2/1A

1mm/min

0.55 GPa

Show Supplier Material materials with Módulo elástico of 0.55 GPa

dry

ISO 527-2/1A

1mm/min

Resistencia a la flexión

15 MPa

Show Supplier Material materials with Resistencia a la flexión of 15 MPa

50%RH

ISO 178

2mm/min

20 MPa

Show Supplier Material materials with Resistencia a la flexión of 20 MPa

dry

ISO 178

2mm/min

Resistencia al choque, ensayo Charpy entallado

-30 °C

55 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 55 kJ/m²

dry

ISO 179/1eA

23 °C

95 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 95 kJ/m²

dry

ISO 179/1eA

23 °C

110 kJ/m²

Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 110 kJ/m²

50%RH

ISO 179/1eA

Aplicaciones térmicas

PropertyValueTesting StandardComment

Temperatura de flexión bajo carga

50 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 50 °C

ISO 75/2Af

1.80 MPa

100 °C

Show Supplier Material materials with Temperatura de flexión bajo carga of 100 °C

ISO 75/2Bf

0.45 MPa

Temperatura de fusión

217 °C

Show Supplier Material materials with Temperatura de fusión of 217 °C

ISO 11357-1/-3

10°C/min

Eléctrico

PropertyValueConditionTesting StandardComment

Surface resistivity

1e+10 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+10 Ω/sq

50%RH

IEC 60093

500V

1e+12 Ω/sq

Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq

dry

IEC 60093

500V

Volume resistivity

1e+11 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm

50%RH

IEC 60093

500V

1e+13 Ω·cm

Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm

dry

IEC 60093

500V

Technological properties

Property
Additives

Plasticizer

Certifications

RoHS 2011/65/UE

Color

Blue

Features

Impact Modified, Heat Stabilized

Processing methods

Injection Molding,Profile Extrusion