RADILON DT 40E50USR 333C BK

Nombres alternativos y comerciales
PA612

Want to keep this datasheet? Save it now in your required format

Description

PA612 semi-rigid, high viscosity extrusion grade. Toughened. Improved resistance to uric acid solutions. Black colour.

Suitable for extrusion of profiles, tubes and pipes. Material especially developed for automotive under the hood applications, employed in selective catalytic reductions (SCR) systems.

Equivalent Materials

PA612

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

FABRICANTE

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materiales de este proveedor

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Ver todos los materiales de este proveedor

Casos de uso

Webinar: Metal Replacement with Engineering Polymers

Propiedades

General

Property	Temperature	Value	Thickness	Testing Standard	Condition	Comment
Absorción de agua		2 % Show Supplier Material materials with Absorción de agua of 2 %	2 mm	ISO 62		immersion at 23°C
Densidad		1.01 g/cm³ Show Supplier Material materials with Densidad of 1.01 g/cm³		ISO 1183	dry
Moisture absorption	23 °C	0.8 % Show Supplier Material materials with Moisture absorption of 0.8 %	2 mm	ISO 62	50%RH

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Límite elástico		31 MPa Show Supplier Material materials with Límite elástico of 31 MPa	dry	ISO 527-2/1A	50mm/min
Módulo de flexión		0.75 GPa Show Supplier Material materials with Módulo de flexión of 0.75 GPa	dry	ISO 178	2mm/min
Módulo elástico		0.95 GPa Show Supplier Material materials with Módulo elástico of 0.95 GPa	dry	ISO 527-2/1A	1mm/min
Resistencia a la flexión		30 MPa Show Supplier Material materials with Resistencia a la flexión of 30 MPa	dry	ISO 178	2mm/min
Resistencia al choque, ensayo Charpy entallado	-30 °C	68 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 68 kJ/m²	dry	ISO 179/1eA
	23 °C	75 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 75 kJ/m²	dry	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Thickness	Testing Standard	Comment
Temperatura de fusión	212 °C Show Supplier Material materials with Temperatura de fusión of 212 °C	1e+12 mm	ISO 11357-1/-3	10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	50%RH	IEC 60093	500V
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 60093	500V

Technological properties

Property
Certifications	RoHS 2011/65/UE
Color	Black
Features	Impact Modified, Heat Stabilized
Processing methods	Injection Molding,Profile Extrusion