RADILON S CT300L 9139 GY

Nombres alternativos y comerciales
PA6-MD30

Want to keep this datasheet? Save it now in your required format

Description

PA6 30% mineral filled injection moulding grade. Lubricated. Grey colour.

Suitable for parts requiring good dimensional stability, reduced shrinkage and low warpage.

Equivalent Materials

PA6-MD30

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

FABRICANTE

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materiales de este proveedor

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Ver todos los materiales de este proveedor

Casos de uso

Webinar: Metal Replacement with Engineering Polymers

Propiedades

General

Property	Value	Condition	Testing Standard
Densidad	1.38 g/cm³ Show Supplier Material materials with Densidad of 1.38 g/cm³	dry	ISO 1183

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Elongación		3.6 % Show Supplier Material materials with Elongación of 3.6 %	dry	ISO 527-2/1A	5mm/min
		12 % Show Supplier Material materials with Elongación of 12 %	50%RH	ISO 527-2/1A	5mm/min
Módulo de flexión		3.4 GPa Show Supplier Material materials with Módulo de flexión of 3.4 GPa	50%RH	ISO 178	2mm/min
		6.8 GPa Show Supplier Material materials with Módulo de flexión of 6.8 GPa	dry	ISO 178	2mm/min
Módulo elástico		3.5 GPa Show Supplier Material materials with Módulo elástico of 3.5 GPa	50%RH	ISO 527-2/1A	1mm/min
		6.9 GPa Show Supplier Material materials with Módulo elástico of 6.9 GPa	dry	ISO 527-2/1A	1mm/min
Resistencia a la flexión		70 MPa Show Supplier Material materials with Resistencia a la flexión of 70 MPa	50%RH	ISO 178	2mm/min
		115 MPa Show Supplier Material materials with Resistencia a la flexión of 115 MPa	dry	ISO 178	2mm/min
Resistencia a la tracción		35 MPa Show Supplier Material materials with Resistencia a la tracción of 35 MPa	50%RH	ISO 527-2/1A	5mm/min
		65 MPa Show Supplier Material materials with Resistencia a la tracción of 65 MPa	dry	ISO 527-2/1A	5mm/min
Resistencia al choque, ensayo Charpy entallado	23 °C	3.5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 3.5 kJ/m²	dry	ISO 179/1eA
	23 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m²	50%RH	ISO 179/1eA

Aplicaciones térmicas

Property	Value	Testing Standard	Comment
Temperatura de flexión bajo carga	95 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 95 °C	ISO 75/2Af	1.80 MPa
	195 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 195 °C	ISO 75/2Bf	0.45 MPa
Temperatura de fusión	220 °C Show Supplier Material materials with Temperatura de fusión of 220 °C	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	205 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 205 °C	ISO 306	50°C/h 50N
Inflamabilidad	Thickness tested (mm): 1.6, Class: HB, Standard: UL 94 \| Automotive Interior Flammability(mm/min): 0 ,method: ISO 3795 and thickness tested (mm): 3

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Surface resistivity	1e+10 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+10 Ω/sq	50%RH	IEC 60093	500V
	1e+12 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+12 Ω/sq	dry	IEC 60093	500V
Volume resistivity	1e+11 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+11 Ω·cm	50%RH	IEC 60093	500V
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 60093	500V

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.7 % Show Supplier Material materials with Contracción of 0.7 %	280/80/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]
	0.8 % Show Supplier Material materials with Contracción of 0.8 %	280/80/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse
Velocidad de flujo de la masa derretida	25 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 25 g/10min		ISO 1133	250°C/2.16Kg

Technological properties

Property
Additives	Release agent
Certifications	RoHS 2011/65/UE
Color	Grey colour
Fillers	30% Mineral Powder
Processing methods	Injection Molding