RENYCLE S T203K 3030 BK

Nombres alternativos y comerciales
PA6-I

Want to keep this datasheet? Save it now in your required format

Description

Partially recycled PA6 injection moulding grade. Toughened. Heat stabilized. Black colour.

This material has been developed to reduce its environmental impact compared to first-choice grades, through the recovery of post-consumer (end-of-life) components previously classified as waste.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Radici Group.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Available suppliers

RADICIGROUP HIGH PERFORMANCE POLYMERS

FABRICANTE

Additional services:

CAE Service: Customized technical support contributing to the success of innovative projects, including metal replacement applications, realized using RADILON®, RADITECK®, RADISTRONG®, RADIFLAM® and RADITER® engineering plastics. This is what RadiciGroup High Performance Polymers can offer its customers, thanks to its state-of-the-art computer-aided engineering (CAE) virtual simulation tools and the experience of its technical specialists.

Materiales de este proveedor

RADILON A CP300K 333 BK

RADILON AESTUS T1 RV300FC 306K BK

TORZEN Marathon G3500XHL BK20

RADILON NeXTreme RV500HHR 3800 BK

RADITER B RV300 100 NT

Ver todos los materiales de este proveedor

Casos de uso

Webinar: Metal Replacement with Engineering Polymers

Propiedades

General

Property	Value	Condition	Testing Standard
Densidad	1.12 g/cm³ Show Supplier Material materials with Densidad of 1.12 g/cm³	dry	ISO 1183

Mecánica

Property	Temperature	Value	Condition	Testing Standard	Comment
Elongación		20 % Show Supplier Material materials with Elongación of 20 %	dry	ISO 527-2/1A	min. \| 50mm/min \| nominal
Elongation at yield		230 % Show Supplier Material materials with Elongation at yield of 230 %	50%RH	ISO 527-2/1A	50mm/min
Límite elástico		35 MPa Show Supplier Material materials with Límite elástico of 35 MPa	50%RH	ISO 527-2/1A	50mm/min
		65 MPa Show Supplier Material materials with Límite elástico of 65 MPa	dry	ISO 527-2/1A	50mm/min
Módulo de flexión		0.72 GPa Show Supplier Material materials with Módulo de flexión of 0.72 GPa	50%RH	ISO 178	2mm/min
		2.5 GPa Show Supplier Material materials with Módulo de flexión of 2.5 GPa	dry	ISO 178	2mm/min
Módulo elástico		0.85 GPa Show Supplier Material materials with Módulo elástico of 0.85 GPa	50%RH	ISO 527-2/1A	1mm/min
		2.5 GPa Show Supplier Material materials with Módulo elástico of 2.5 GPa	dry	ISO 527-2/1A	1mm/min
Resistencia a la flexión		30 MPa Show Supplier Material materials with Resistencia a la flexión of 30 MPa	50%RH	ISO 178	2mm/min
		100 MPa Show Supplier Material materials with Resistencia a la flexión of 100 MPa	dry	ISO 178	2mm/min
Resistencia al choque, ensayo Charpy entallado	23 °C	12.5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 12.5 kJ/m²	dry	ISO 179/1eA
	23 °C	90 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 90 kJ/m²	50%RH	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado		No Break at 23°C	dry	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Testing Standard	Comment
Temperatura de flexión bajo carga	60 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 60 °C	ISO 75/2Af	1.80 MPa
Temperatura de fusión	220 °C Show Supplier Material materials with Temperatura de fusión of 220 °C	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	1.4 % Show Supplier Material materials with Contracción of 1.4 %	250/80/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa]
	1.6 % Show Supplier Material materials with Contracción of 1.6 %	250/80/60*	ISO 294-4	*Melt Temp. [°C] / Mold Temp. [°C] / Cavity Press. [MPa], Transverse
Velocidad de flujo de la masa derretida	20 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 20 g/10min		ISO 1133	250°C/2.16Kg

Technological properties

Property
Additives	Release agent
Certifications	RoHS 2011/65/UE
Color	Black
Features	Impact Modified, Heat Stabilized
Processing methods	Injection Molding