KetaSpire® PEEK MS NT1 AM Filament

Want to keep this datasheet? Save it now in your required format

Description

Ketaspire® MS NT1 AM Filament provides long-term performance up to 240°C, including exceptional chemical resistance, outstanding wear and abrasion resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil & Gas, Aerospace and Automotive.

Los datos sobre este material han sido proporcionados por Solvay Specialty Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Comment
Densidad	1.29 g/cm³ Show Supplier Material materials with Densidad of 1.29 g/cm³	ASTM D792

Medidas

Property	Value
Diámetro	1.75 mm Show Supplier Material materials with Diámetro of 1.75 mm

Mecánica

Property	Value	Comment
Elongación	26.0 % Show Supplier Material materials with Elongación of 26.0 %	ASTM D638
Elongation at yield	4.8 % Show Supplier Material materials with Elongation at yield of 4.8 %	ASTM D638
Impact strength, Izod notched, ASTM	81.0 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 81.0 J/m	ASTM D256
Límite elástico	85.0 MPa Show Supplier Material materials with Límite elástico of 85.0 MPa	ASTM D638
Módulo elástico	3.12 GPa Show Supplier Material materials with Módulo elástico of 3.12 GPa	ASTM D638
Resistencia a la tracción	48.0 MPa Show Supplier Material materials with Resistencia a la tracción of 48.0 MPa	ASTM D638

Aplicaciones térmicas

Property	Value	Comment
Temperatura de fusión	343.0 °C Show Supplier Material materials with Temperatura de fusión of 343.0 °C	ASTM D3418

Technological properties

Property
Application areas	Aerospace Applications, Automotive Applications, Oil/Gas Applications
Certifications	Substances used to manufacture the polymer grade used for this filament meets the requirements of Commission Regulation (EU) N°10/2011, which implements the framework regulation EU 1935/2004 as related to plastic materials and articles intended to come into contact with food and its subsequent amendments as well as the GMP requirements for EU 2023/2006. Please feel free to contact the supplier for RoHS Compliance.
Color	Natural
Features	Chemical Resistant Ductile Flame Retardant Good Dimensional Stability Good Impact Resistance High Heat Resistance
Other	Test specimen parameters: First layer: 0.3mm thick Subsequent layers: 0.1mm 100% infill 3 shells Printing speed: 18 mm/s Note: Typical properties: these are not to be construed as specifications
Processing methods	Fused Filament Fabrication (FFF) Printing conditions for above data table: Filament drying conditions, minimum temperature 4h: 150°C Extruder temperature: 400-440°C Bed temperature: 180-220°C Printing tool path: cross hatching in the XY plane

KetaSpire® PEEK MS NT1 AM Filament

Description

Ashby charts

Usos

Materiales de este proveedor

Casos de uso

Propiedades