Propiedades
Medidas
| Property | Value |
|---|---|
Diámetro | 25.4 - 355.6 mm Show Supplier Material materials with Diámetro of 25.4 - 355.6 mm |
Mecánica
| Property | Temperature | Value |
|---|---|---|
Charpy impact energy, V-notch | -46.0 °C | 41 J Show Supplier Material materials with Charpy impact energy, V-notch of 41 J |
Dureza Brinell | 23.0 °C | 255 [-] Show Supplier Material materials with Dureza Brinell of 255 [-] |
Elongación | 23.0 °C | 16 % Show Supplier Material materials with Elongación of 16 % |
Límite elástico Rp 0,2 | 23.0 °C | 725 MPa Show Supplier Material materials with Límite elástico Rp 0,2 of 725 MPa |
Resistencia a la tracción | 23.0 °C | 860 MPa Show Supplier Material materials with Resistencia a la tracción of 860 MPa |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Azufre | 0.03 % Show Supplier Material materials with Azufre of 0.03 % | ||
Carbono | 0.07 % Show Supplier Material materials with Carbono of 0.07 % | ||
Cobre | 3 - 5 % Show Supplier Material materials with Cobre of 3 - 5 % | ||
Cromo | 15 - 17.5 % Show Supplier Material materials with Cromo of 15 - 17.5 % | ||
Fósforo | 0.04 % Show Supplier Material materials with Fósforo of 0.04 % | ||
Hierro | Balance | ||
Manganeso | 1 % Show Supplier Material materials with Manganeso of 1 % | ||
Níquel | 3 - 5 % Show Supplier Material materials with Níquel of 3 - 5 % | ||
Otro | 0.15 - 0.45 % Show Supplier Material materials with Otro of 0.15 - 0.45 % | Nb+Ta | |
Silicona | 1 % Show Supplier Material materials with Silicona of 1 % | ||
Technological properties
| Property | ||
|---|---|---|
| Application areas | chemical, petrochemical, paper and general metalworking industries | |
| Heat Treatment | Solution annealing at 1000 to 1050°C, hardened at 480°C (H900) to 621°C (H1150) | |
| Welding | Good, Pre-heating and post-heating practices used for standard hardenable stainless grades are not required. Min. RREN: 17 | |