DIN 1725-1 Grade 3.0505 H24

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn0,5Mg0,5 is special one for the packing planned alloy. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occur by cold forming. It is very well warm and cold formable and is very well suitable to the deep-drawing (no lappet formation). Because of the good Erichsen index and the relatively high strength (F 24), it finds in addition in architecture use. Standardised is this alloy as sheet metal or strip with a thickness of max. 0,35 mm (DIN 1788). Application: In the packing for menu bowls, light container, bottle caps, doses dose covers as well as in architecture as profile boards for roofs and wall linings and for shutters and suspended covers. For heat exchangers and flexible pipes.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.71 g/cm³ Show Material materials with Densidad of 2.71 g/cm³	H24	EN 573-3, EN 485
		2.72 g/cm³ Show Material materials with Densidad of 2.72 g/cm³	H24	EN 573-3, EN 485
	20.0 °C	2.71 g/cm³ Show Material materials with Densidad of 2.71 g/cm³	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Dureza Brinell		47.0 [-] Show Material materials with Dureza Brinell of 47.0 [-]	H24	EN 573-3, EN 485
Módulo de cizallamiento		25.0 - 26.0 GPa Show Material materials with Módulo de cizallamiento of 25.0 - 26.0 GPa				Typical for Wrought 3000 Series Aluminium
Módulo elástico		69.0 GPa Show Material materials with Módulo elástico of 69.0 GPa	H24	EN 573-3, EN 485
		70.0 GPa Show Material materials with Módulo elástico of 70.0 GPa	H24	EN 573-3, EN 485
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Resistencia a la tracción		150.0 - 200.0 MPa Show Material materials with Resistencia a la tracción of 150.0 - 200.0 MPa	H24	EN 573-3, EN 485
	20.0 °C	170.0 - 210.0 MPa Show Material materials with Resistencia a la tracción of 170.0 - 210.0 MPa	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		893.0 - 920.0 J/(kg·K) Show Material materials with Calor específico of 893.0 - 920.0 J/(kg·K)				Typical for Wrought 3000 Series Aluminium
Coeficiente de dilatación térmica	20 °C	2.36e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.36e-05 1/K	H24	EN 573-3, EN 485
	100 °C	2.36e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.36e-05 1/K	H24	EN 573-3, EN 485
Conductividad térmica		160.0 - 190.0 W/(m·K) Show Material materials with Conductividad térmica of 160.0 - 190.0 W/(m·K)	H24	EN 573-3, EN 485
		172 W/(m·K) Show Material materials with Conductividad térmica of 172 W/(m·K)	H24	EN 573-3, EN 485
	20.0 °C	180.0 - 190.0 W/(m·K) Show Material materials with Conductividad térmica of 180.0 - 190.0 W/(m·K)	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Temperatura de fusión		635.0 - 655.0 °C Show Material materials with Temperatura de fusión of 635.0 - 655.0 °C	H24	EN 573-3, EN 485
		640.0 - 655.0 °C Show Material materials with Temperatura de fusión of 640.0 - 655.0 °C	H24	EN 573-3, EN 485

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica		23000000.0 - 26000000.0 S/m Show Material materials with Conductividad eléctrica of 23000000.0 - 26000000.0 S/m	H24	EN 573-3, EN 485
		26000000.0 S/m Show Material materials with Conductividad eléctrica of 26000000.0 S/m	H24	EN 573-3, EN 485
	20.0 °C	25000000.0 - 27000000.0 S/m Show Material materials with Conductividad eléctrica of 25000000.0 - 27000000.0 S/m	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
Resistividad eléctrica		3.85e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.85e-08 Ω·m	H24	EN 573-3, EN 485
		3.85e-08 - 4.35e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.85e-08 - 4.35e-08 Ω·m	H24	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.3 % Show Material materials with Cobre of 0.3 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Cromo	0.2 % Show Material materials with Cromo of 0.2 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Hierro	0.7 % Show Material materials with Hierro of 0.7 %	H24	DIN 1725-1, EN 573-3, EN 573-4	Flat
	0.70 % Show Material materials with Hierro of 0.70 %	H24	EN 573-3, EN 485
Magnesio	0.2 - 0.8 % Show Material materials with Magnesio of 0.2 - 0.8 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Manganeso	0.3 - 0.8 % Show Material materials with Manganeso of 0.3 - 0.8 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Silicona	0.6 % Show Material materials with Silicona of 0.6 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Titanio	0.1 % Show Material materials with Titanio of 0.1 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat
Zinc	0.4 % Show Material materials with Zinc of 0.4 %	H24	DIN 1725-1, EN 573-3, EN 573-4, EN 485	Flat

Technological properties

Property

Workability

Good workability.