DIN 1725-1 Grade 3.0515 H12

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1 is an Al-Mn alloy, which belongs to the nature-hard aluminum materials. Mn increases the strength compared with pure aluminium, but it does not impair the corrosion resistance. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occur by cold forming. It is very well formable, very well corrosion resistant and weldable. In these characteristics it resembles the pure aluminium, but with the attainable strength it exceeds this. The alloy AlMn1 has a increased heat resistance compared with pure aluminium, as result of the of the Mn-additive (inhibits recrystallisation). Application: In the building industry for roofings, as outer skin of buildings, in the apparatus and tank construction as heat exchanger (bank of tubes, profiles, gilled pipes, sheet metals), for radiators, air conditioning systems, pipings for compressed gas tanks, for tanks according VdTUEV Werkstoffblaetter, as antennas for radio relay link and satellite communication (mirror) for technical flow pressed parts, for solid rivets, for generally metal-describe, in food industry (including commercial devices), in the construction of vehicles (including tank cars) and as packing (sheet metal packings generally).

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.73 g/cm³ Show Material materials with Densidad of 2.73 g/cm³	H12	EN 573-3, EN 485
	20.0 °C	2.73 g/cm³ Show Material materials with Densidad of 2.73 g/cm³	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Dureza Brinell		36.0 [-] Show Material materials with Dureza Brinell of 36.0 [-]	H12	EN 573-3, EN 485
	20.0 °C	40.0 [-] Show Material materials with Dureza Brinell of 40.0 [-]	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Elongación		3.0 % Show Material materials with Elongación of 3.0 %	H12	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Elongación of 4.0 %	H12	EN 573-3, EN 485		A50
		5.0 % Show Material materials with Elongación of 5.0 %	H12	EN 573-3, EN 485		A50
		6.0 % Show Material materials with Elongación of 6.0 %	H12	EN 573-3, EN 485		A50
		7.0 % Show Material materials with Elongación of 7.0 %	H12	EN 573-3, EN 485		A50
		8.0 % Show Material materials with Elongación of 8.0 %	H12	EN 573-3, EN 485		A100
	20.0 °C	5.0 % Show Material materials with Elongación of 5.0 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip	A10
	20.0 °C	7.0 % Show Material materials with Elongación of 7.0 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
	20.0 °C	25.0 % Show Material materials with Elongación of 25.0 %	H12	DIN 1725-1	Strip	A50 Transverse
Módulo de cizallamiento		26.1 GPa Show Material materials with Módulo de cizallamiento of 26.1 GPa	H12	EN 573-3, EN 485
	20.0 °C	24.0 - 26.5 GPa Show Material materials with Módulo de cizallamiento of 24.0 - 26.5 GPa	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Módulo elástico		69.5 GPa Show Material materials with Módulo elástico of 69.5 GPa	H12	EN 573-3, EN 485
	20.0 °C	60.0 - 65.0 GPa Show Material materials with Módulo elástico of 60.0 - 65.0 GPa	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Resistencia a la tracción		115.0 - 155.0 MPa Show Material materials with Resistencia a la tracción of 115.0 - 155.0 MPa	H12	EN 573-3, EN 485
	20.0 °C	90.0 - 140.0 MPa Show Material materials with Resistencia a la tracción of 90.0 - 140.0 MPa	H12	DIN 1725-1	Strip	Transverse
	20.0 °C	120.0 - 160.0 MPa Show Material materials with Resistencia a la tracción of 120.0 - 160.0 MPa	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Ángulo de flexión a 180°		1.5 °/t Show Material materials with Ángulo de flexión a 180° of 1.5 °/t	H12	EN 573-3, EN 485
Ángulo de flexión a 90°		0.5 °/t Show Material materials with Ángulo de flexión a 90° of 0.5 °/t	H12	EN 573-3, EN 485
		1.0 °/t Show Material materials with Ángulo de flexión a 90° of 1.0 °/t	H12	EN 573-3, EN 485
		2.0 °/t Show Material materials with Ángulo de flexión a 90° of 2.0 °/t	H12	EN 573-3, EN 485

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape
Calor específico		893.0 J/(kg·K) Show Material materials with Calor específico of 893.0 J/(kg·K)	H12	EN 573-3, EN 485
	20.0 °C	893.0 J/(kg·K) Show Material materials with Calor específico of 893.0 J/(kg·K)	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Coeficiente de dilatación térmica	20 °C	2.35e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.35e-05 1/K	H12	EN 573-3, EN 485
	100 °C	2.35e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.35e-05 1/K	H12	EN 573-3, EN 485
Conductividad térmica	20.0 °C	160.0 - 200.0 W/(m·K) Show Material materials with Conductividad térmica of 160.0 - 200.0 W/(m·K)	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Temperatura de fusión		645.0 - 655.0 °C Show Material materials with Temperatura de fusión of 645.0 - 655.0 °C	H12	EN 573-3, EN 485

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica	20.0 °C	22000000.0 - 28000000.0 S/m Show Material materials with Conductividad eléctrica of 22000000.0 - 28000000.0 S/m	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Resistividad eléctrica		3.57e-08 - 4.55e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.57e-08 - 4.55e-08 Ω·m	H12	EN 573-3, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.1 % Show Material materials with Cobre of 0.1 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Cromo	0.1 % Show Material materials with Cromo of 0.1 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Hierro	0.7 % Show Material materials with Hierro of 0.7 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
	0.70 % Show Material materials with Hierro of 0.70 %	H12	EN 573-3, EN 485
Magnesio	0.3 % Show Material materials with Magnesio of 0.3 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Manganeso	0.9 - 1.5 % Show Material materials with Manganeso of 0.9 - 1.5 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Silicona	0.5 % Show Material materials with Silicona of 0.5 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip
Titanio	0.1 Show Material materials with Titanio of 0.1	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4	Strip
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	H12	DIN 1725-1, EN 573-3, EN 573-4, VdTÜV WB 513, VdTÜV WB 420-4, EN 485	Strip

Technological properties

Property

Workability

Good workability.