DIN 1725-1 Grade 3.0525 H18

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg0,5 is similarly to AlMn1 in its properties. It reaches strength up to F 25. The alloy belongs to the nature-hard aluminum materials. A strength increase can only occure by cold forming. It is very well hot and cold formable and is suitable to the deep-drawing (no lappet formation). The alloy AlMn1Mg0,5 is very well corrosion resistant and is sea water steady. As semi-finished material it is present in accordance with DIN 1788 and DIN 1745 only as sheet metal or strip. Application: Mainly in the packing for cans (lower parts), for menu bowls, for covers. In the building industry for claddings, roofings, for sun protection facilities (roller schutter, lamella net curtain) and for roll gates as well as for flexible pipes and in the construction of vehicles.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.72 g/cm³ Show Material materials with Densidad of 2.72 g/cm³	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	2.72 g/cm³ Show Material materials with Densidad of 2.72 g/cm³	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Dureza Brinell		69.0 [-] Show Material materials with Dureza Brinell of 69.0 [-]	H18	EN 573-3, EN 485
	20.0 °C	75.0 [-] Show Material materials with Dureza Brinell of 75.0 [-]	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Elongación		1.0 % Show Material materials with Elongación of 1.0 %	H18	EN 573-3, EN 485		A50
		2.0 % Show Material materials with Elongación of 2.0 %	H18	EN 573-3, EN 485		A50
		4.0 % Show Material materials with Elongación of 4.0 %	H18	EN 573-3, EN 1592		A100
	20.0 °C	2.0 % Show Material materials with Elongación of 2.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	3.0 % Show Material materials with Elongación of 3.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo de cizallamiento	20.0 °C	26.5 Show Material materials with Módulo de cizallamiento of 26.5	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo elástico		70.0 GPa Show Material materials with Módulo elástico of 70.0 GPa	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	65.0 GPa Show Material materials with Módulo elástico of 65.0 GPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Resistencia a la tracción		220.0 MPa Show Material materials with Resistencia a la tracción of 220.0 MPa	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	215.0 - 235.0 MPa Show Material materials with Resistencia a la tracción of 215.0 - 235.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	215.0 - 255.0 MPa Show Material materials with Resistencia a la tracción of 215.0 - 255.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Strip
Ángulo de flexión a 90°		1.5 °/t Show Material materials with Ángulo de flexión a 90° of 1.5 °/t	H18	EN 573-3, EN 485
		2.5 °/t Show Material materials with Ángulo de flexión a 90° of 2.5 °/t	H18	EN 573-3, EN 485

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape
Calor específico	20.0 °C	893.0 J/(kg·K) Show Material materials with Calor específico of 893.0 J/(kg·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Coeficiente de dilatación térmica	20 °C	2.3199999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K	H18	EN 573-3, EN 1592, EN 485
	100 °C	2.3199999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K	H18	EN 573-3, EN 1592, EN 485
Conductividad térmica		160.0 - 190.0 W/(m·K) Show Material materials with Conductividad térmica of 160.0 - 190.0 W/(m·K)	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	200.0 W/(m·K) Show Material materials with Conductividad térmica of 200.0 W/(m·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Temperatura de fusión		630.0 - 654.0 °C Show Material materials with Temperatura de fusión of 630.0 - 654.0 °C	H18	EN 573-3, EN 1592, EN 485

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica		23000000.0 - 25000000.0 S/m Show Material materials with Conductividad eléctrica of 23000000.0 - 25000000.0 S/m	H18	EN 573-3, EN 1592, EN 485
	20.0 °C	28000000.0 S/m Show Material materials with Conductividad eléctrica of 28000000.0 S/m	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Resistividad eléctrica		4e-08 - 4.35e-08 Ω·m Show Material materials with Resistividad eléctrica of 4e-08 - 4.35e-08 Ω·m	H18	EN 573-3, EN 1592, EN 485

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.3 % Show Material materials with Cobre of 0.3 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Cromo	0.1 % Show Material materials with Cromo of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Hierro	0.7 % Show Material materials with Hierro of 0.7 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	0.70 % Show Material materials with Hierro of 0.70 %	H18	EN 573-3, EN 1592, EN 485
Magnesio	0.2 - 0.6 % Show Material materials with Magnesio of 0.2 - 0.6 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Manganeso	1.0 - 1.5 % Show Material materials with Manganeso of 1.0 - 1.5 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Silicona	0.6 % Show Material materials with Silicona of 0.6 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Titanio	0.1 % Show Material materials with Titanio of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1592, EN 485	Sheet, Strip

Technological properties

Property

Anodizing

decorative: sufficient, Protective: very good

Corrosion properties

Seawater: very good, weathering: very good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)