DIN 1725-1 Grade 3.3307 O

Want to keep this datasheet? Save it now in your required format

Description

The alloy Al99,85Mg0,5 belongs to the standardised glossing materials. It can be polished after preceding mechanical polishing chemically or electrolytically to high gloss. For using the high gloss surface a afterwards anodising is necessary. The degree of arranged reflection (gloss degree) dependents from the degree of purity of the alloy and the thickness of the produced anodising layer. The alloy Al99,85Mg0,5 is nature hard, i.e. with their a strength increase can be achieved only by cold forming. The material is well cold and warm fomrable, has a very good corrosion resistance and is also well anodically to be oxidized. Application: For metal goods, like building fittings, table-ware, flow pressed parts, autotrim and divides and for decoration and jeweller goods.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad	20.0 °C	2.7 g/cm³ Show Material materials with Densidad of 2.7 g/cm³	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	23.0 [-] Show Material materials with Dureza Brinell of 23.0 [-]	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Elongación	20.0 °C	14.0 % Show Material materials with Elongación of 14.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Wire	A100
	20.0 °C	20.0 % Show Material materials with Elongación of 20.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire	A10
	20.0 °C	23.0 % Show Material materials with Elongación of 23.0 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo de cizallamiento	20.0 °C	27.0 Show Material materials with Módulo de cizallamiento of 27.0	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Módulo elástico	20.0 °C	70.0 Show Material materials with Módulo elástico of 70.0	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	20.0 °C	70.0 MPa Show Material materials with Resistencia a la tracción of 70.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4	Wire
	20.0 °C	80.0 - 120.0 MPa Show Material materials with Resistencia a la tracción of 80.0 - 120.0 MPa	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		879.0 - 963.0 J/(kg·K) Show Material materials with Calor específico of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Coeficiente de dilatación térmica		2.2e-05 - 2.5e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.2e-05 - 2.5e-05 1/K				Typical for Wrought 5000 Series Aluminium
Conductividad térmica	20.0 °C	215.0 W/(m·K) Show Material materials with Conductividad térmica of 215.0 W/(m·K)	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	35000000.0 Show Material materials with Conductividad eléctrica of 35000000.0	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Hierro	0.08 Show Material materials with Hierro of 0.08	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Magnesio	0.3 - 0.6 % Show Material materials with Magnesio of 0.3 - 0.6 %	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Manganeso	0.03 Show Material materials with Manganeso of 0.03	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Silicona	0.08 Show Material materials with Silicona of 0.08	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Titanio	0.02 Show Material materials with Titanio of 0.02	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire
Zinc	0.05 Show Material materials with Zinc of 0.05	O	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip, Wire

Technological properties

Property

Workability

Good workability.