DIN 1725-1 Grade 3.3315 T6

Want to keep this datasheet? Save it now in your required format

Description

The AlMg alloy is characterised all by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increase the strength, the cold forming capacity decreases with it. The alloys of this type are nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. The material is well polishabel and anodisable. The splinter-giving machinability becomes better with increasing Mg content just like the weldability. The alloy AlMg1 reaches strength grades to F 22. Application: Their main field of application is the building industry. In the building industry for claddings, roofing and trim, for transport containers. For metal goods, like building fittings, table-ware, flow pressed parts, reflectors. In food industry, for furniture (incl. camping furniture) as well as for describe and for covers with composite slabs (intermediate layer: Polyethylene).

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad	20.0 °C	2.69 g/cm³ Show Material materials with Densidad of 2.69 g/cm³	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	52.0 [-] Show Material materials with Dureza Brinell of 52.0 [-]	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	20.0 °C	57.0 [-] Show Material materials with Dureza Brinell of 57.0 [-]	T6	DIN 1725-1, EN 573-3, EN 573-4	Strip
Elongación	20.0 °C	4.0 % Show Material materials with Elongación of 4.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Strip	A10
	20.0 °C	5.0 % Show Material materials with Elongación of 5.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	5.0 % Show Material materials with Elongación of 5.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Strip
	20.0 °C	6.0 % Show Material materials with Elongación of 6.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo de cizallamiento	20.0 °C	25.0 GPa Show Material materials with Módulo de cizallamiento of 25.0 GPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo elástico	20.0 °C	60.0 - 65.0 GPa Show Material materials with Módulo elástico of 60.0 - 65.0 GPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	20.0 °C	165.0 - 205.0 MPa Show Material materials with Resistencia a la tracción of 165.0 - 205.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	20.0 °C	190.0 MPa Show Material materials with Resistencia a la tracción of 190.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Strip

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico	20.0 °C	879.0 J/(kg·K) Show Material materials with Calor específico of 879.0 J/(kg·K)	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Coeficiente de dilatación térmica	-50.0 °C	2.18e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.18e-05 1/K	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	100.0 °C	2.36e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.36e-05 1/K	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	200.0 °C	2.45e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.45e-05 1/K	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	300.0 °C	2.55e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.55e-05 1/K	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Conductividad térmica	20.0 °C	160.0 - 220.0 W/(m·K) Show Material materials with Conductividad térmica of 160.0 - 220.0 W/(m·K)	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	23000000.0 - 31000000.0 S/m Show Material materials with Conductividad eléctrica of 23000000.0 - 31000000.0 S/m	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.05 Show Material materials with Cobre of 0.05	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Cromo	0.1 Show Material materials with Cromo of 0.1	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Hierro	0.45 Show Material materials with Hierro of 0.45	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Magnesio	0.7 - 1.1 % Show Material materials with Magnesio of 0.7 - 1.1 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Manganeso	0.15 Show Material materials with Manganeso of 0.15	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Silicona	0.3 Show Material materials with Silicona of 0.3	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Zinc	0.2 Show Material materials with Zinc of 0.2	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Technological properties

Property

Workability

Good workability.

Looking for suppliers of this material? Click to see 2 supplier of DIN 1725-1 Grade 3.3315 T6 on Matmatch