DIN 1725-1 Grade 3.3326 H18

Want to keep this datasheet? Save it now in your required format

Description

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. From the AlMg alloys the mark AlMg1,5 has to exhibit only relatively small mechanical properties. Standardised semi-finished material only for tubes in accordance to DIN 1746 and for extruded profiles according to DIN 1748. Application: Ferrules for wires rope in accordance to DIN 3093. In the civil engineering for carrying constructions, for transport containers. In electro-technology for antennas and parabolic reflectors.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.69 g/cm³ Show Material materials with Densidad of 2.69 g/cm³	H18	EN 573-3, EN 1301
	20.0 °C	2.68 g/cm³ Show Material materials with Densidad of 2.68 g/cm³	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	60.0 [-] Show Material materials with Dureza Brinell of 60.0 [-]	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Elongación		3.0 % Show Material materials with Elongación of 3.0 %	H18	EN 573-3, EN 1301
	20.0 °C	2.0 % Show Material materials with Elongación of 2.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube	A10
	20.0 °C	3.0 % Show Material materials with Elongación of 3.0 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Módulo de cizallamiento	20.0 °C	26.5 GPa Show Material materials with Módulo de cizallamiento of 26.5 GPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Módulo elástico		70.0 GPa Show Material materials with Módulo elástico of 70.0 GPa	H18	EN 573-3, EN 1301
	20.0 °C	65.0 - 70.0 GPa Show Material materials with Módulo elástico of 65.0 - 70.0 GPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción		245.0 MPa Show Material materials with Resistencia a la tracción of 245.0 MPa	H18	EN 573-3, EN 1301
	20.0 °C	220.0 MPa Show Material materials with Resistencia a la tracción of 220.0 MPa	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico	20.0 °C	921.0 J/(kg·K) Show Material materials with Calor específico of 921.0 J/(kg·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Coeficiente de dilatación térmica	20 °C	2.38e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.38e-05 1/K	H18	EN 573-3, EN 1301
	100 °C	2.38e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.38e-05 1/K	H18	EN 573-3, EN 1301
Conductividad térmica	20.0 °C	135.0 - 167.0 W/(m·K) Show Material materials with Conductividad térmica of 135.0 - 167.0 W/(m·K)	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	22000000.0 - 26000000.0 S/m Show Material materials with Conductividad eléctrica of 22000000.0 - 26000000.0 S/m	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.05 % Show Material materials with Cobre of 0.05 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Cromo	0.3 % Show Material materials with Cromo of 0.3 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Hierro	0.45 % Show Material materials with Hierro of 0.45 %	H18	DIN 1725-1, EN 573-3, EN 573-4	Tube
	0.45 % Show Material materials with Hierro of 0.45 %	H18	EN 573-3, EN 1301
Magnesio	1.4 - 2.1 % Show Material materials with Magnesio of 1.4 - 2.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Manganeso	0.25 % Show Material materials with Manganeso of 0.25 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Silicona	0.3 % Show Material materials with Silicona of 0.3 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Titanio	0.1 % Show Material materials with Titanio of 0.1 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	H18	DIN 1725-1, EN 573-3, EN 573-4, EN 1301	Tube

Technological properties

Property

Workability

Good workability.