WL 3.3354 Grade 3.3354 F

Want to keep this datasheet? Save it now in your required format

Description

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. AlMg5 has the highest Mg content of the standardized AlMg alloys, so it is badly cold formable, but the strength is the highest, so that the employment is possible for statically more highly loaded constructions. The alloy is suitable for a splinter-giving machinig on automats. It possesses sensitivity to intergranular corrosion. By a purposeful heat treatment and/or by additive of Mn or Cr the inclination to the intergranular corrosion can be reduced. Application: In the optics, in the automobile engineering for body parts, in mechanical engineering (turned parts). For joining elements (solid rivets, blind rivets, riveting nuts and screws). In the building industry for carrying constructions as well as in shipbuilding considering the sensitivity to corrosion.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad	20.0 °C	2.64 g/cm³ Show Material materials with Densidad of 2.64 g/cm³	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	55.0 [-] Show Material materials with Dureza Brinell of 55.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile
	20.0 °C	60.0 [-] Show Material materials with Dureza Brinell of 60.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Rod
	20.0 °C	65.0 [-] Show Material materials with Dureza Brinell of 65.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Tube
Elongación	20.0 °C	10.0 % Show Material materials with Elongación of 10.0 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging
	20.0 °C	11.0 % Show Material materials with Elongación of 11.0 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Profile, Rod, Tube	A10
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging
	20.0 °C	13.0 % Show Material materials with Elongación of 13.0 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Profile, Rod, Tube
Módulo de cizallamiento	20.0 °C	27.0 GPa Show Material materials with Módulo de cizallamiento of 27.0 GPa	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Módulo elástico	20.0 °C	67.0 - 72.0 GPa Show Material materials with Módulo elástico of 67.0 - 72.0 GPa	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	20.0 °C	240.0 MPa Show Material materials with Resistencia a la tracción of 240.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging
	20.0 °C	250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Profile, Rod, Tube
	20.0 °C	260.0 MPa Show Material materials with Resistencia a la tracción of 260.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico	20.0 °C	904.0 J/(kg·K) Show Material materials with Calor específico of 904.0 J/(kg·K)	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Coeficiente de dilatación térmica	-50.0 °C	2.25e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.25e-05 1/K	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
	100.0 °C	2.41e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.41e-05 1/K	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
	200.0 °C	2.51e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.51e-05 1/K	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
	300.0 °C	2.61e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.61e-05 1/K	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Conductividad térmica	20.0 °C	110.0 - 140.0 W/(m·K) Show Material materials with Conductividad térmica of 110.0 - 140.0 W/(m·K)	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	15000000.0 - 19000000.0 S/m Show Material materials with Conductividad eléctrica of 15000000.0 - 19000000.0 S/m	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.1 Show Material materials with Cobre of 0.1	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Cromo	0.2 Show Material materials with Cromo of 0.2	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Hierro	0.5 Show Material materials with Hierro of 0.5	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Magnesio	4.5 - 5.6 % Show Material materials with Magnesio of 4.5 - 5.6 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Manganeso	0.1 - 0.6 % Show Material materials with Manganeso of 0.1 - 0.6 %	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Silicona	0.4 Show Material materials with Silicona of 0.4	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Titanio	0.2 Show Material materials with Titanio of 0.2	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube
Zinc	0.2 Show Material materials with Zinc of 0.2	F	DIN 1725-1, EN 573-3, EN 573-4, WL 3.3354	Forging, Profile, Rod, Tube

Technological properties

Property

Workability

Good workability.