DIN 1725-1 Grade 3.3527 T6

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMg2Mn0,8 has similar characteristics as the alloy AlMg1,8. The additive of Mn (>0,6%) causes an increase of the heat resistance (up to 150°C) of the material and the recrystallisation limit. The result of the last is, that in case of extruded profiles the strength in longitudinal direction increases. The material is characterised by a good corrosion resistance. It is sea water steady and steady against saline atmosphere. With the Mg content the strength increases, the cold forming capacity decreases. The alloy is nature hard, i.e. that only by a cold forming shaping however by a purposeful heat treatment a strength increase cannot be attained. The splinter-giving workability and the weldability are improved with increasing Mg content. Application: In the apparatus engineering for receivers accordint to AD-W6/1 and according to VdTUEV-Werkstoffblaetter, for compressed gas tanks (pipings), for very low-temperature tanks and for temperatures to 250 °C. In the automobile engineering for utilizable superstructures, silo trucks, in shipbuilding for trunk and superstructures. In the building industry for roofings, claddings, for carrying constructions according to DIN 4173 and sun protection facilities as well as for furniture (including camping furniture).

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad	20.0 °C	2.71 g/cm³ Show Material materials with Densidad of 2.71 g/cm³	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell	20.0 °C	80.0 [-] Show Material materials with Dureza Brinell of 80.0 [-]	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Elongación	20.0 °C	6.0 % Show Material materials with Elongación of 6.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip	A10
	20.0 °C	7.0 % Show Material materials with Elongación of 7.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Flat	A10
	20.0 °C	7.0 % Show Material materials with Elongación of 7.0 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Módulo de cizallamiento	20.0 °C	26.5 Show Material materials with Módulo de cizallamiento of 26.5	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Módulo elástico	20.0 °C	70.0 Show Material materials with Módulo elástico of 70.0	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción	20.0 °C	250.0 - 290.0 MPa Show Material materials with Resistencia a la tracción of 250.0 - 290.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Flat
	20.0 °C	265.0 - 305.0 MPa Show Material materials with Resistencia a la tracción of 265.0 - 305.0 MPa	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		879.0 - 963.0 J/(kg·K) Show Material materials with Calor específico of 879.0 - 963.0 J/(kg·K)				Typical for Wrought 5000 Series Aluminium
Coeficiente de dilatación térmica		2.2e-05 - 2.5e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.2e-05 - 2.5e-05 1/K				Typical for Wrought 5000 Series Aluminium
Conductividad térmica	20.0 °C	140.0 - 180.0 W/(m·K) Show Material materials with Conductividad térmica of 140.0 - 180.0 W/(m·K)	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Temperatura de fusión		560.0 - 655.0 °C Show Material materials with Temperatura de fusión of 560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip	Long
		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Conductividad eléctrica	20.0 °C	20000000.0 - 25000000.0 S/m Show Material materials with Conductividad eléctrica of 20000000.0 - 25000000.0 S/m	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Resistividad eléctrica		3.3e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.1 Show Material materials with Cobre of 0.1	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Cromo	0.3 Show Material materials with Cromo of 0.3	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Hierro	0.5 Show Material materials with Hierro of 0.5	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Magnesio	1.6 - 2.5 % Show Material materials with Magnesio of 1.6 - 2.5 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Manganeso	0.5 - 1.1 % Show Material materials with Manganeso of 0.5 - 1.1 %	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Silicona	0.4 Show Material materials with Silicona of 0.4	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Titanio	0.1 Show Material materials with Titanio of 0.1	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip
Zinc	0.2 Show Material materials with Zinc of 0.2	T6	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Flat, Strip

Technological properties

Property

Workability

Good workability.