Allgemein
Property | Value | Condition | Testing Standard |
---|---|---|---|
Dichte | 1.27 g/cm³ Show Supplier Material materials with Dichte of 1.27 g/cm³ | dry | ISO 1183 |
Moisture absorption | 0.9 % Show Supplier Material materials with Moisture absorption of 0.9 % | Sim. to ISO 62 | |
Wasserabsorption | 1.9 % Show Supplier Material materials with Wasserabsorption of 1.9 % | Sim. to ISO 62 |
Mechanisch
Property | Temperature | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|---|
Dehnung | 3 % Show Supplier Material materials with Dehnung of 3 % | cond., dry | ISO 527-1/-2 | ||
Elastizitätsmodul | 8.5 GPa Show Supplier Material materials with Elastizitätsmodul of 8.5 GPa | cond. | ISO 527-1/-2 | ||
8.9 GPa Show Supplier Material materials with Elastizitätsmodul of 8.9 GPa | dry | ISO 527-1/-2 | |||
Härte, Shore D | 79 [-] Show Supplier Material materials with Härte, Shore D of 79 [-] | dry | ISO 7619-1 | 15 seconds | |
Schlagfestigkeit, Charpy gekerbt | 23 °C | 10 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 10 kJ/m² | dry | ISO 179/1eA | |
23 °C | 11 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 11 kJ/m² | cond. | ISO 179/1eA | ||
Schlagzähigkeit, Charpy ungekerbt | No Break at 23°C | cond. | ISO 179/1eU | ||
Zugfestigkeit | 125 MPa Show Supplier Material materials with Zugfestigkeit of 125 MPa | cond. | ISO 527-1/-2 | ||
130 MPa Show Supplier Material materials with Zugfestigkeit of 130 MPa | dry | ISO 527-1/-2 |
Thermisch
Property | Value | Condition | Testing Standard | Pressure | Comment | ||||
---|---|---|---|---|---|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 1.8e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.8e-05 1/K | dry | ISO 11359-1/-2 | ||||||
0.00011 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 0.00011 1/K | dry | ISO 11359-1/-2 | Transverse | ||||||
Schmelzpunkt | 255 °C Show Supplier Material materials with Schmelzpunkt of 255 °C | dry | ISO 11357-1/-3 | 10°C/min | |||||
Vicat-Erweichungstemperatur | 195 °C Show Supplier Material materials with Vicat-Erweichungstemperatur of 195 °C | ISO 306 | 50°C/h 50N | ||||||
Wärmeformbeständigkeitstemperatur | 225 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 225 °C | dry | ISO 75-1/-2 | 2 MPa | |||||
245 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 245 °C | dry | ISO 75-1/-2 | 0.45 MPa | ||||||
Entflammbarkeit | At thickness 1.6 mm IEC 60695-11-10: HB, At thickness 3.2 mm IEC 60695-11-10: HB |
Elektrisch
Property | Value | Condition | Frequency | Testing Standard | Comment |
---|---|---|---|---|---|
Dielektrizitätskonstante | 3 [-] Show Supplier Material materials with Dielektrizitätskonstante of 3 [-] | cond. | 100Hz | IEC 60250 | |
4 [-] Show Supplier Material materials with Dielektrizitätskonstante of 4 [-] | IEC 60250 | 1MHz | |||
Durchschlagfestigkeit | 34 kV/mm Show Supplier Material materials with Durchschlagfestigkeit of 34 kV/mm | cond., dry | IEC 60243-1 | ||
Kriechstromfestigkeit | 600 V Show Supplier Material materials with Kriechstromfestigkeit of 600 V | cond. | IEC 60112 | ||
Surface resistivity | 1e+15 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+15 Ω/sq | cond. | IEC 60093 | min. | |
Verlustfaktor | 0.016 [-] Show Supplier Material materials with Verlustfaktor of 0.016 [-] | cond. | 1MHz | IEC 60250 | |
0.029 [-] Show Supplier Material materials with Verlustfaktor of 0.029 [-] | cond. | 100Hz | IEC 60250 | ||
Volume resistivity | 1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm | cond. | IEC 60093 | min. |
Rheological Properties
Property | Value | Condition | Testing Standard | Comment |
---|---|---|---|---|
Schmelzvolumenflussrate | 7 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 7 cm³/10min | dry | ISO 1133 | 275°C/2.16kg |
Schrumpfung | 0.3 % Show Supplier Material materials with Schrumpfung of 0.3 % | dry | ISO 294-4 | |
0.7 % Show Supplier Material materials with Schrumpfung of 0.7 % | dry | ISO 294-4 | Transverse |
Technological properties
Property | ||
---|---|---|
Application areas | Fittings, Components, and Injection Molded Parts | |
Fillers | 30% Glass Fiber | |
Processing methods | Injection Molding: |