Formadur 400 Superclean

Want to keep this datasheet? Save it now in your required format

Description

Formadur 400 shows the following features and properties:


  • Pre-hardened plastic mold steel with approx. 400HB
  • Excellent toughness & hardenability
  • Excellent polishability (ESR)
  • Easy machinability
  • Good weldability
  • Best texturing properties
  • Diese Materialdaten wurden von Deutsche Edelstahlwerke Specialty Steel (DEW) zur Verfügung gestellt

    Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
    Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

    Ashby charts

    Eigenschaften

    Mechanisch

    PropertyValueComment

    Härte, Brinell

    365 - 410 [-]

    Show Supplier Material materials with Härte, Brinell of 365 - 410 [-]

    as-delivered condition

    Härte, Rockwell C

    28 - 51 [-]

    Show Supplier Material materials with Härte, Rockwell C of 28 - 51 [-]

    Zugfestigkeit

    1220 - 1385 MPa

    Show Supplier Material materials with Zugfestigkeit of 1220 - 1385 MPa

    Thermisch

    PropertyTemperatureValueComment

    Koeffizient der thermischen Ausdehnung

    100 °C

    1.11e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.11e-05 1/K

    for 20°C to the mentioned temperature

    200 °C

    1.29e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.29e-05 1/K

    for 20°C to the mentioned temperature

    300 °C

    1.34e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.34e-05 1/K

    for 20°C to the mentioned temperature

    400 °C

    1.35e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.35e-05 1/K

    for 20°C to the mentioned temperature

    500 °C

    1.38e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.38e-05 1/K

    for 20°C to the mentioned temperature

    600 °C

    1.41e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.41e-05 1/K

    for 20°C to the mentioned temperature

    700 °C

    1.43e-05 1/K

    Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.43e-05 1/K

    for 20°C to the mentioned temperature

    Wärmeleitfähigkeit

    23 °C

    36 W/(m·K)

    Show Supplier Material materials with Wärmeleitfähigkeit of 36 W/(m·K)

    150 °C

    37.4 W/(m·K)

    Show Supplier Material materials with Wärmeleitfähigkeit of 37.4 W/(m·K)

    300 °C

    33 W/(m·K)

    Show Supplier Material materials with Wärmeleitfähigkeit of 33 W/(m·K)

    Chemical properties

    PropertyValue

    Andere

    Plus additions

    Chrom

    1.9 %

    Show Supplier Material materials with Chrom of 1.9 %

    Eisen

    Balance

    Kohlenstoff

    0.36 %

    Show Supplier Material materials with Kohlenstoff of 0.36 %

    Mangan

    0.9 %

    Show Supplier Material materials with Mangan of 0.9 %

    Molybdän

    0.5 %

    Show Supplier Material materials with Molybdän of 0.5 %

    Nickel

    0.5 %

    Show Supplier Material materials with Nickel of 0.5 %

    Silizium

    0.4 %

    Show Supplier Material materials with Silizium of 0.4 %

    Technological properties

    Property
    Application areas

    As Formadur 400 with highest demands on polishability

    Heat Treatment

    Soft annealing: 710-740°C (Cooling in furnace) - Hardening: 820-850°C and quenching in oil or polymer