EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

Material X 2 CrNiMoN 17 13 5 (now: X2CrNiMoN17-13-5), material number 1.4539, is applicated acc. to VdTÜV-Wbl 405 : 2000-12 for pressure vessels acc. to TRB 100 and AD-data sheets W 2 and W 10 from -196 to 400 °C. and for pressure gas tanks as per TRG 201 and TRG 203 from -196 to 400 °C. Further application in nuclear power engineering as far as nuclear rules or object-related specifications permit use from -196 to 400 °C. The austenitic rolled and forged steel is cold and warm formable. Its welding suitability is allowing for general accepted engineering rules examined for the following welding methods: arc hand welding, tungsten inert-gas welding, submerged welding and plasma welding. A pre-heating is not necessary, a heat after treatment (solution annealing with subsequent quenching) is required only in certain cases (special corrosion load). Steel X2CrNiMoN17-13-5 is comparable to X 2 CrNiMoN 17 13 5 acc. to DIN 17440 : 1985-07 (invalid). The material shows high pitting and crevice corrosion resistance (more favorable properties than 1.4436) as well as stress corrosion resistance, highest general resistance in many organic acids with high concentration and temperature, e.g. in nonoxidizing acids and chloride containing media (seawater, hypochloride base), also in inorganic and mixed acids as well as resistance to intercrystalline corrosion also in sensitized condition. Application in reactor industry, offshore technology, chemical industry.

Related Standards

EN 10088-1

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	8 - 8.01 g/cm³ Show Material materials with Dichte of 8 - 8.01 g/cm³

Mechanisch

Property	Temperature	Value
Dehnung	20.0 °C	35 % Show Material materials with Dehnung of 35 %
Dehnung A80, transversal	20.0 °C	35 - 40 % Show Material materials with Dehnung A80, transversal of 35 - 40 %
Dehnung, transversal	20.0 °C	30 - 40 % Show Material materials with Dehnung, transversal of 30 - 40 %
Elastizitätsmodul	-100.0 °C	206 GPa Show Material materials with Elastizitätsmodul of 206 GPa
	20.0 °C	196 - 200 GPa Show Material materials with Elastizitätsmodul of 196 - 200 GPa
	100.0 °C	190 - 194 GPa Show Material materials with Elastizitätsmodul of 190 - 194 GPa
	200.0 °C	182 - 186 GPa Show Material materials with Elastizitätsmodul of 182 - 186 GPa
	300.0 °C	174 - 179 GPa Show Material materials with Elastizitätsmodul of 174 - 179 GPa
	400.0 °C	166 - 172 GPa Show Material materials with Elastizitätsmodul of 166 - 172 GPa
	500.0 °C	158 - 165 GPa Show Material materials with Elastizitätsmodul of 158 - 165 GPa
	600.0 °C	150 GPa Show Material materials with Elastizitätsmodul of 150 GPa
	700.0 °C	142 GPa Show Material materials with Elastizitätsmodul of 142 GPa
	800.0 °C	134 GPa Show Material materials with Elastizitätsmodul of 134 GPa

Hardness, Brinell, trans	20.0 °C	250 [-] Show Material materials with Hardness, Brinell, trans of 250 [-]
Härte, Brinell	20.0 °C	250 [-] Show Material materials with Härte, Brinell of 250 [-]
Poissonzahl	20.0 °C	0.28 [-] Show Material materials with Poissonzahl of 0.28 [-]
Schubmodule	20.0 °C	77.3 GPa Show Material materials with Schubmodule of 77.3 GPa
Streckgrenze Rp 0,2	20.0 °C	280 MPa Show Material materials with Streckgrenze Rp 0,2 of 280 MPa
	100.0 °C	225 MPa Show Material materials with Streckgrenze Rp 0,2 of 225 MPa
	150.0 °C	200 MPa Show Material materials with Streckgrenze Rp 0,2 of 200 MPa
	200.0 °C	185 MPa Show Material materials with Streckgrenze Rp 0,2 of 185 MPa
	250.0 °C	175 MPa Show Material materials with Streckgrenze Rp 0,2 of 175 MPa
	300.0 °C	165 MPa Show Material materials with Streckgrenze Rp 0,2 of 165 MPa
	350.0 °C	155 MPa Show Material materials with Streckgrenze Rp 0,2 of 155 MPa
	400.0 °C	150 MPa Show Material materials with Streckgrenze Rp 0,2 of 150 MPa
	Unlock all property charts
Streckgrenze Rp 0,2, transversal	20.0 °C	270 - 290 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 270 - 290 MPa
Streckgrenze Rp 1,0	20.0 °C	315 MPa Show Material materials with Streckgrenze Rp 1,0 of 315 MPa
	100.0 °C	255 MPa Show Material materials with Streckgrenze Rp 1,0 of 255 MPa
	150.0 °C	230 MPa Show Material materials with Streckgrenze Rp 1,0 of 230 MPa
	200.0 °C	210 MPa Show Material materials with Streckgrenze Rp 1,0 of 210 MPa
	250.0 °C	200 MPa Show Material materials with Streckgrenze Rp 1,0 of 200 MPa
	300.0 °C	190 MPa Show Material materials with Streckgrenze Rp 1,0 of 190 MPa
	350.0 °C	180 MPa Show Material materials with Streckgrenze Rp 1,0 of 180 MPa
	400.0 °C	175 MPa Show Material materials with Streckgrenze Rp 1,0 of 175 MPa
	Unlock all property charts
Streckgrenze Rp 1,0, transversal	20.0 °C	310 - 320 MPa Show Material materials with Streckgrenze Rp 1,0, transversal of 310 - 320 MPa
Zugfestigkeit	20.0 °C	580 - 800 MPa Show Material materials with Zugfestigkeit of 580 - 800 MPa
Zugfestigkeit, transversal	20.0 °C	580 - 800 MPa Show Material materials with Zugfestigkeit, transversal of 580 - 800 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	-100.0 °C	1.49E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.49E-5 1/K
	20.0 °C	1.61E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.61E-5 1/K
	100.0 °C	1.6E-5 - 1.67E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 - 1.67E-5 1/K
	200.0 °C	1.65E-5 - 1.72E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.65E-5 - 1.72E-5 1/K
	300.0 °C	1.7E-5 - 1.77E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-5 - 1.77E-5 1/K
	400.0 °C	1.75E-5 - 1.81E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 - 1.81E-5 1/K
	500.0 °C	1.8E-5 - 1.84E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.8E-5 - 1.84E-5 1/K
	600.0 °C	1.88E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.88E-5 1/K
	700.0 °C	1.91E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.91E-5 1/K
	800.0 °C	1.94E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.94E-5 1/K
	900.0 °C	1.97E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.97E-5 1/K
	1000.0 °C	2E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2E-5 1/K
	Unlock all property charts
Max. Betriebstemperatur, lang		-196 - 400 °C Show Material materials with Max. Betriebstemperatur, lang of -196 - 400 °C
Schmelzpunkt		1230 - 1480 °C Show Material materials with Schmelzpunkt of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Spezifische Wärmekapazität	-100.0 °C	440 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 440 J/(kg·K)
	20.0 °C	472 - 500 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 472 - 500 J/(kg·K)
	100.0 °C	487 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 487 J/(kg·K)
	200.0 °C	503 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 503 J/(kg·K)
	300.0 °C	512 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 512 J/(kg·K)
	400.0 °C	520 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 520 J/(kg·K)
	500.0 °C	530 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 530 J/(kg·K)
	600.0 °C	541 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 541 J/(kg·K)
	700.0 °C	551 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 551 J/(kg·K)
	800.0 °C	559 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 559 J/(kg·K)
	900.0 °C	565 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 565 J/(kg·K)
	1000.0 °C	571 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 571 J/(kg·K)
	Unlock all property charts
Temperaturleitfähigkeit	20.0 °C	3.6 mm²/s Show Material materials with Temperaturleitfähigkeit of 3.6 mm²/s
	100.0 °C	3.7 mm²/s Show Material materials with Temperaturleitfähigkeit of 3.7 mm²/s
	200.0 °C	4 mm²/s Show Material materials with Temperaturleitfähigkeit of 4 mm²/s
	300.0 °C	4.4 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.4 mm²/s
	400.0 °C	4.6 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.6 mm²/s
	500.0 °C	4.7 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.7 mm²/s
	600.0 °C	4.9 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.9 mm²/s
	700.0 °C	5.2 mm²/s Show Material materials with Temperaturleitfähigkeit of 5.2 mm²/s
	800.0 °C	5.5 mm²/s Show Material materials with Temperaturleitfähigkeit of 5.5 mm²/s
	Unlock all property charts
Wärmeleitfähigkeit	20.0 °C	13.5 - 14 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 13.5 - 14 W/(m·K)
	100.0 °C	14.9 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 14.9 W/(m·K)
	200.0 °C	16.7 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 16.7 W/(m·K)
	300.0 °C	18.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 18.3 W/(m·K)
	400.0 °C	19.8 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 19.8 W/(m·K)
	500.0 °C	21.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 21.3 W/(m·K)
	600.0 °C	22.7 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 22.7 W/(m·K)
	700.0 °C	24.2 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 24.2 W/(m·K)
	800.0 °C	25.6 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 25.6 W/(m·K)
	Unlock all property charts

Elektrisch

Property	Temperature	Value
spezifischer Widerstand	20.0 °C	7.75E-7 - 8.5E-7 Ω·m Show Material materials with spezifischer Widerstand of 7.75E-7 - 8.5E-7 Ω·m
	100.0 °C	8.42E-7 Ω·m Show Material materials with spezifischer Widerstand of 8.42E-7 Ω·m
	200.0 °C	9.04E-7 Ω·m Show Material materials with spezifischer Widerstand of 9.04E-7 Ω·m
	300.0 °C	9.62E-7 Ω·m Show Material materials with spezifischer Widerstand of 9.62E-7 Ω·m
	400.0 °C	1.01E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.01E-6 Ω·m
	500.0 °C	1.06E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.06E-6 Ω·m
	600.0 °C	1.1E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.1E-6 Ω·m
	700.0 °C	1.13E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.13E-6 Ω·m
	800.0 °C	1.16E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.16E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Chrom	16.5 - 18.5 % Show Material materials with Chrom of 16.5 - 18.5 %
Kohlenstoff	0.03 % Show Material materials with Kohlenstoff of 0.03 %
Mangan	2 % Show Material materials with Mangan of 2 %
Molybdän	4 - 5 % Show Material materials with Molybdän of 4 - 5 %
Nickel	12.5 - 14.5 % Show Material materials with Nickel of 12.5 - 14.5 %
Phosphor	0.05 % Show Material materials with Phosphor of 0.05 %
Schwefel	0.015 % Show Material materials with Schwefel of 0.015 %
Silizium	1 % Show Material materials with Silizium of 1 %
Stickstoff	0.12 - 0.22 % Show Material materials with Stickstoff of 0.12 - 0.22 %

Looking for suppliers of this material? Click to see 7 supplier of EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT) on Matmatch

EN 10088-1 Grade X2CrNiMoN17-13-5 solution annealed (+AT)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 4 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften