EN 10025-4 Grade S460M thermomechanically rolled

Want to keep this datasheet? Save it now in your required format

Description

S460M is a weldable fine-grained steel with a min. yield point of 460 N/mm². The steel is applicated in thermo mechanical rolled condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions. Subsequent heating above 580°C for thermo mechanical rolled products causes reduction of the strength properties. Application limit: at -20°C is warranted a notch impact energy of 40J (longitudinal test specimen). The carbon equivalent (by arrangement) amounts to: for nominal size: < 16 mm: 0,45% > 16 < 40 mm: 0,46% Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 12 mm can be warranted the following bending radius values: longitudinal: 5 x s transverse: 4 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Warm forming: thermo mechanical rolled products are unsuitable for warm forming.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	7.8 g/cm³ Show Material materials with Dichte of 7.8 g/cm³	Typical for Steel

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		12.0 % Show Material materials with Dehnung of 12.0 %				Predicted Value, A200
		15.1 % Show Material materials with Dehnung of 15.1 %				Predicted Value, A80
		17.5 % Show Material materials with Dehnung of 17.5 %				Predicted Value, Transverse
		19.5 % Show Material materials with Dehnung of 19.5 %				Predicted Value, A80 Transverse
		20.2 % Show Material materials with Dehnung of 20.2 %				Predicted Value, A5
		22.6 % Show Material materials with Dehnung of 22.6 %				Predicted Value, A50
	20 °C	17 % Show Material materials with Dehnung of 17 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Elastizitätsmodul		190 - 210 GPa Show Material materials with Elastizitätsmodul of 190 - 210 GPa				Typical for Steel
Flächenreduzierung		41.9 % Show Material materials with Flächenreduzierung of 41.9 %				Predicted Value
		44.6 % Show Material materials with Flächenreduzierung of 44.6 %				Predicted Value, Transverse
Härte, Brinell		247 [-] Show Material materials with Härte, Brinell of 247 [-]				Predicted Value, Transverse
Poissonzahl		0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]				Typical for Steel
Scherfestigkeit		525.4 MPa Show Material materials with Scherfestigkeit of 525.4 MPa				Predicted Value
Schubmodule		80.3 GPa Show Material materials with Schubmodule of 80.3 GPa				Predicted Value
Streckgrenze		257.3 MPa Show Material materials with Streckgrenze of 257.3 MPa				Predicted Value, RP1
		319.9 MPa Show Material materials with Streckgrenze of 319.9 MPa				Predicted Value, RP1 Transverse
		427.1 MPa Show Material materials with Streckgrenze of 427.1 MPa				Predicted Value, RP02
		432.5 MPa Show Material materials with Streckgrenze of 432.5 MPa				Predicted Value, Transverse
		469.5 MPa Show Material materials with Streckgrenze of 469.5 MPa				Predicted Value, RP02 Transverse
		515.9 MPa Show Material materials with Streckgrenze of 515.9 MPa				Predicted Value, RP05
		516.7 MPa Show Material materials with Streckgrenze of 516.7 MPa				Predicted Value, RP002
	20 °C	385 MPa Show Material materials with Streckgrenze of 385 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	400 MPa Show Material materials with Streckgrenze of 400 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	410 MPa Show Material materials with Streckgrenze of 410 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	430 MPa Show Material materials with Streckgrenze of 430 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	440 MPa Show Material materials with Streckgrenze of 440 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	460 MPa Show Material materials with Streckgrenze of 460 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Zugfestigkeit	20 °C	490 - 720 MPa Show Material materials with Zugfestigkeit of 490 - 720 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	490 - 710 MPa Show Material materials with Zugfestigkeit of 490 - 710 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	490 - 690 MPa Show Material materials with Zugfestigkeit of 490 - 690 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	490 - 680 MPa Show Material materials with Zugfestigkeit of 490 - 680 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	490 - 660 MPa Show Material materials with Zugfestigkeit of 490 - 660 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	500 - 720 MPa Show Material materials with Zugfestigkeit of 500 - 720 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	500 - 710 MPa Show Material materials with Zugfestigkeit of 500 - 710 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	500 - 690 MPa Show Material materials with Zugfestigkeit of 500 - 690 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	500 - 680 MPa Show Material materials with Zugfestigkeit of 500 - 680 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	500 - 660 MPa Show Material materials with Zugfestigkeit of 500 - 660 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 720 MPa Show Material materials with Zugfestigkeit of 510 - 720 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 710 MPa Show Material materials with Zugfestigkeit of 510 - 710 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 690 MPa Show Material materials with Zugfestigkeit of 510 - 690 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 680 MPa Show Material materials with Zugfestigkeit of 510 - 680 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 660 MPa Show Material materials with Zugfestigkeit of 510 - 660 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 720 MPa Show Material materials with Zugfestigkeit of 530 - 720 MPa	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
	20 °C	530 - 710 MPa Show Material materials with Zugfestigkeit of 530 - 710 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 690 MPa Show Material materials with Zugfestigkeit of 530 - 690 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 680 MPa Show Material materials with Zugfestigkeit of 530 - 680 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 660 MPa Show Material materials with Zugfestigkeit of 530 - 660 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	540 - 720 MPa Show Material materials with Zugfestigkeit of 540 - 720 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	540 - 710 MPa Show Material materials with Zugfestigkeit of 540 - 710 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	540 - 690 MPa Show Material materials with Zugfestigkeit of 540 - 690 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	540 - 680 MPa Show Material materials with Zugfestigkeit of 540 - 680 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	20 °C	540 - 660 MPa Show Material materials with Zugfestigkeit of 540 - 660 MPa	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire

Thermisch

Property	Value	Comment
Koeffizient der thermischen Ausdehnung	11.85 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 11.85 1/K	Predicted Value
Spezifische Wärmekapazität	455.7 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 455.7 J/(kg·K)	Predicted Value
Wärmeleitfähigkeit	37.86 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 37.86 W/(m·K)	Predicted Value

Elektrisch

Property	Value	Comment
Elektrische Leitfähigkeit	7 S/m Show Material materials with Elektrische Leitfähigkeit of 7 S/m	Predicted Value
spezifischer Widerstand	35 Ω·m Show Material materials with spezifischer Widerstand of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminium	0.02 % Show Material materials with Aluminium of 0.02 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Chrom	0.3 % Show Material materials with Chrom of 0.3 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Kohlenstoff	0.16 % Show Material materials with Kohlenstoff of 0.16 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Kupfer	0.55 % Show Material materials with Kupfer of 0.55 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Mangan	1.7 % Show Material materials with Mangan of 1.7 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Molybdän	0.2 % Show Material materials with Molybdän of 0.2 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Nickel	0.45 % Show Material materials with Nickel of 0.45 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
	0.8 % Show Material materials with Nickel of 0.8 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
Niobium	0.05 % Show Material materials with Niobium of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Phosphor	0.03 % Show Material materials with Phosphor of 0.03 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.035 % Show Material materials with Phosphor of 0.035 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Schwefel	0.025 % Show Material materials with Schwefel of 0.025 %	thermomechanically rolled	EN 10025-4, EN 10113-3	Strip, Sheet, Flat, Rod, Wire
	0.03 % Show Material materials with Schwefel of 0.03 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar
Silizium	0.6 % Show Material materials with Silizium of 0.6 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Stickstoff	0.025 % Show Material materials with Stickstoff of 0.025 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Titan	0.05 % Show Material materials with Titan of 0.05 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire
Vanadium	0.12 % Show Material materials with Vanadium of 0.12 %	thermomechanically rolled	EN 10113-3, EN 10025-4	Sheet, Strip, Bar, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 10 supplier of EN 10025-4 Grade S460M thermomechanically rolled on Matmatch

EN 10025-4 Grade S460M thermomechanically rolled

Description

Related Standards

Equivalent Materials

Ashby charts

There are 7 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften