EN 10025-2 Grade S355J0 normalized or normalized formed (+N)

View suppliers (63)
Want to keep this datasheet? Save it now in your required format

Description

The hot rolled, unalloyed quality steel S355J0 is a higher strength fine grained steel for dynamic loaded steel structural engineering. Dimensioning advantages in respect to the S235J2 due to the by 120 MPa higher yield strength. The steel shows a by 15% higher resistance to mineral wear due to sliding action in comparison to S235J2. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery. For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered. For this steel are available (mat. no 1.0554, S355J0C) grades for folding, roll forming to shape and cold drawing.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValueConditionRelated StandardsShape

Dichte

20 °C

7.84 g/cm³

Show Material materials with Dichte of 7.84 g/cm³

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Mechanisch

PropertyTemperatureValueConditionRelated StandardsShapeComment

Dehnung

17.6 %

Show Material materials with Dehnung of 17.6 %

Predicted Value, A200

19.6 %

Show Material materials with Dehnung of 19.6 %

Predicted Value, A50

22.4 %

Show Material materials with Dehnung of 22.4 %

Predicted Value, A5

20 °C

12 %

Show Material materials with Dehnung of 12 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80 Transverse

20 °C

13 %

Show Material materials with Dehnung of 13 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80 Transverse

20 °C

14 %

Show Material materials with Dehnung of 14 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80 Transverse

20 °C

14 %

Show Material materials with Dehnung of 14 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80

20 °C

15 %

Show Material materials with Dehnung of 15 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80 Transverse

20 °C

15 %

Show Material materials with Dehnung of 15 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80

20 °C

16 %

Show Material materials with Dehnung of 16 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80 Transverse

20 °C

16 %

Show Material materials with Dehnung of 16 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80

20 °C

17 %

Show Material materials with Dehnung of 17 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80

20 °C

17 %

Show Material materials with Dehnung of 17 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

17 %

Show Material materials with Dehnung of 17 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

18 %

Show Material materials with Dehnung of 18 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

A80

20 °C

18 %

Show Material materials with Dehnung of 18 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

18 %

Show Material materials with Dehnung of 18 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

19 %

Show Material materials with Dehnung of 19 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

20 %

Show Material materials with Dehnung of 20 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Transverse

20 °C

20 %

Show Material materials with Dehnung of 20 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

21 %

Show Material materials with Dehnung of 21 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

22 %

Show Material materials with Dehnung of 22 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Elastizitätsmodul

-100 °C

217 GPa

Show Material materials with Elastizitätsmodul of 217 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

212 GPa

Show Material materials with Elastizitätsmodul of 212 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

207 GPa

Show Material materials with Elastizitätsmodul of 207 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

199 GPa

Show Material materials with Elastizitätsmodul of 199 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

192 GPa

Show Material materials with Elastizitätsmodul of 192 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

184 GPa

Show Material materials with Elastizitätsmodul of 184 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

175 GPa

Show Material materials with Elastizitätsmodul of 175 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

164 GPa

Show Material materials with Elastizitätsmodul of 164 GPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Flächenreduzierung

44.3 %

Show Material materials with Flächenreduzierung of 44.3 %

Predicted Value, Transverse

51.9 %

Show Material materials with Flächenreduzierung of 51.9 %

Predicted Value

Härte, Brinell

244 [-]

Show Material materials with Härte, Brinell of 244 [-]

Predicted Value, Transverse

Poissonzahl

0.29 [-]

Show Material materials with Poissonzahl of 0.29 [-]

Typical for Low Carbon Steel

Scherfestigkeit

508.4 MPa

Show Material materials with Scherfestigkeit of 508.4 MPa

Predicted Value

Schubmodule

82 GPa

Show Material materials with Schubmodule of 82 GPa

Typical for Low Carbon Steel

Streckgrenze

243.8 MPa

Show Material materials with Streckgrenze of 243.8 MPa

Predicted Value, RP1

309.1 MPa

Show Material materials with Streckgrenze of 309.1 MPa

Predicted Value, RP1 Transverse

368.5 MPa

Show Material materials with Streckgrenze of 368.5 MPa

Predicted Value, Transverse

383.4 MPa

Show Material materials with Streckgrenze of 383.4 MPa

Predicted Value, RP05

400.2 MPa

Show Material materials with Streckgrenze of 400.2 MPa

Predicted Value, RP02

475.2 MPa

Show Material materials with Streckgrenze of 475.2 MPa

Predicted Value, RP02 Transverse

480.2 MPa

Show Material materials with Streckgrenze of 480.2 MPa

Predicted Value, RP002

20 °C

275 MPa

Show Material materials with Streckgrenze of 275 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

285 MPa

Show Material materials with Streckgrenze of 285 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

295 MPa

Show Material materials with Streckgrenze of 295 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

315 MPa

Show Material materials with Streckgrenze of 315 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

325 MPa

Show Material materials with Streckgrenze of 325 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

335 MPa

Show Material materials with Streckgrenze of 335 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

345 MPa

Show Material materials with Streckgrenze of 345 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

355 MPa

Show Material materials with Streckgrenze of 355 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Zugfestigkeit

20 °C

450 - 680 MPa

Show Material materials with Zugfestigkeit of 450 - 680 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 630 MPa

Show Material materials with Zugfestigkeit of 450 - 630 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

450 - 600 MPa

Show Material materials with Zugfestigkeit of 450 - 600 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 680 MPa

Show Material materials with Zugfestigkeit of 470 - 680 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 630 MPa

Show Material materials with Zugfestigkeit of 470 - 630 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

470 - 600 MPa

Show Material materials with Zugfestigkeit of 470 - 600 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 680 MPa

Show Material materials with Zugfestigkeit of 510 - 680 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 630 MPa

Show Material materials with Zugfestigkeit of 510 - 630 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

510 - 600 MPa

Show Material materials with Zugfestigkeit of 510 - 600 MPa

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Thermisch

PropertyTemperatureValueConditionRelated StandardsShapeComment

Koeffizient der thermischen Ausdehnung

-100 °C

1.08e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.08e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

1.19e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.19e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

1.25e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.25e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

1.3e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.3e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

1.36e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.36e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

1.41e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.41e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

1.45e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.45e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

1.49e-05 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.49e-05 1/K

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Max. Betriebstemperatur

368.8 °C

Show Material materials with Max. Betriebstemperatur of 368.8 °C

Predicted Value, Long

500 °C

Show Material materials with Max. Betriebstemperatur of 500 °C

Typical for Carbon Steel

Schmelzpunkt

1480 - 1526 °C

Show Material materials with Schmelzpunkt of 1480 - 1526 °C

Typical for Low Carbon Steel

Spezifische Wärmekapazität

-100 °C

423 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 423 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

20 °C

461 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 461 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

479 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 479 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

499 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 499 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

517 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 517 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

536 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 536 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

558 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 558 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

587 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 587 J/(kg·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Temperaturleitfähigkeit

20 °C

12.9 mm²/s

Show Material materials with Temperaturleitfähigkeit of 12.9 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

12.2 mm²/s

Show Material materials with Temperaturleitfähigkeit of 12.2 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

11.1 mm²/s

Show Material materials with Temperaturleitfähigkeit of 11.1 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

9.9 mm²/s

Show Material materials with Temperaturleitfähigkeit of 9.9 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

8.7 mm²/s

Show Material materials with Temperaturleitfähigkeit of 8.7 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

7.3 mm²/s

Show Material materials with Temperaturleitfähigkeit of 7.3 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

5.9 mm²/s

Show Material materials with Temperaturleitfähigkeit of 5.9 mm²/s

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Wärmeleitfähigkeit

20 °C

46.5 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 46.5 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

47.2 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 47.2 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

45.9 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 45.9 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

43.5 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 43.5 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

40.9 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 40.9 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

38.1 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 38.1 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

35.3 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 35.3 W/(m·K)

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Elektrisch

PropertyTemperatureValueConditionRelated StandardsShapeComment

Elektrische Leitfähigkeit

7 S/m

Show Material materials with Elektrische Leitfähigkeit of 7 S/m

Predicted Value

spezifischer Widerstand

20 °C

2.24e-07 Ω·m

Show Material materials with spezifischer Widerstand of 2.24e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

100 °C

2.71e-07 Ω·m

Show Material materials with spezifischer Widerstand of 2.71e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

200 °C

3.44e-07 Ω·m

Show Material materials with spezifischer Widerstand of 3.44e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

300 °C

4.31e-07 Ω·m

Show Material materials with spezifischer Widerstand of 4.31e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

400 °C

5.32e-07 Ω·m

Show Material materials with spezifischer Widerstand of 5.32e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

500 °C

6.5e-07 Ω·m

Show Material materials with spezifischer Widerstand of 6.5e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

600 °C

7.86e-07 Ω·m

Show Material materials with spezifischer Widerstand of 7.86e-07 Ω·m

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Magnetisch

PropertyValueComment

Curie-Temperatur

770 °C

Show Material materials with Curie-Temperatur of 770 °C

Typical for Low Carbon Steel

Chemical properties

PropertyValueConditionRelated StandardsShape

Kohlenstoff

0.2 %

Show Material materials with Kohlenstoff of 0.2 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Kupfer

0.55 %

Show Material materials with Kupfer of 0.55 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Mangan

1.6 %

Show Material materials with Mangan of 1.6 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Phosphor

0.03 %

Show Material materials with Phosphor of 0.03 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Schwefel

0.03 %

Show Material materials with Schwefel of 0.03 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Silizium

0.55 %

Show Material materials with Silizium of 0.55 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire

Stickstoff

0.012 %

Show Material materials with Stickstoff of 0.012 %

normalized or normalized formed (+N)

EN 10025-2, EN 10025

Strip, Sheet, Flat, Rod, Wire