EN 10025-2 Grade S355J0C as-rolled condition (+AR)

Want to keep this datasheet? Save it now in your required format

Description

S355J0C is used for folding, section cold forming and cold drawing grade. The high-tensile fine grained steel is applicable for welding constructions up to -20 °C subject to the load. Compared to S235J0C is achievable a considerable saving of material due to the by 120 MPa higher yield point. The steel shows a by 15% higher resistance to mineral wear due to sliding action in comparison to S235J0. Max. product thickness amounts 20 mm for folding and 8 mm for cold roll forming grades.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	7.8 - 7.9 g/cm³ Show Material materials with Dichte of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		17.1 % Show Material materials with Dehnung of 17.1 %				Predicted Value, A200
		21.8 % Show Material materials with Dehnung of 21.8 %				Predicted Value, A5
		23.2 % Show Material materials with Dehnung of 23.2 %				Predicted Value, A50
	20 °C	12 % Show Material materials with Dehnung of 12 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80 Transverse
	20 °C	13 % Show Material materials with Dehnung of 13 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80 Transverse
	20 °C	14 % Show Material materials with Dehnung of 14 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80 Transverse
	20 °C	15 % Show Material materials with Dehnung of 15 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80 Transverse
	20 °C	16 % Show Material materials with Dehnung of 16 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80 Transverse
	20 °C	16 % Show Material materials with Dehnung of 16 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80
	20 °C	17 % Show Material materials with Dehnung of 17 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80
	20 °C	18 % Show Material materials with Dehnung of 18 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat	A80
	20 °C	20 % Show Material materials with Dehnung of 20 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Flat, Bar, Sheet, Strip	Transverse
	20 °C	22 % Show Material materials with Dehnung of 22 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Flat, Bar, Sheet, Strip
Elastizitätsmodul		200 - 215 GPa Show Material materials with Elastizitätsmodul of 200 - 215 GPa				Typical for Low Carbon Steel
Flächenreduzierung		41.0 % Show Material materials with Flächenreduzierung of 41.0 %				Predicted Value
		43.7 % Show Material materials with Flächenreduzierung of 43.7 %				Predicted Value, Transverse
Poissonzahl		0.29 [-] Show Material materials with Poissonzahl of 0.29 [-]				Typical for Low Carbon Steel
Scherfestigkeit		513.2 MPa Show Material materials with Scherfestigkeit of 513.2 MPa				Predicted Value
Schubmodule		82 GPa Show Material materials with Schubmodule of 82 GPa				Typical for Low Carbon Steel
Streckgrenze		254.2 MPa Show Material materials with Streckgrenze of 254.2 MPa				Predicted Value, RP1
		316.5 MPa Show Material materials with Streckgrenze of 316.5 MPa				Predicted Value, RP1 Transverse
		350.6 MPa Show Material materials with Streckgrenze of 350.6 MPa				Predicted Value, Transverse
		355.9 MPa Show Material materials with Streckgrenze of 355.9 MPa				Predicted Value, RP02
		366.5 MPa Show Material materials with Streckgrenze of 366.5 MPa				Predicted Value, RP05
		446.5 MPa Show Material materials with Streckgrenze of 446.5 MPa				Predicted Value, RP02 Transverse
		482.8 MPa Show Material materials with Streckgrenze of 482.8 MPa				Predicted Value, RP002
	20 °C	345 MPa Show Material materials with Streckgrenze of 345 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
	20 °C	355 MPa Show Material materials with Streckgrenze of 355 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Zugfestigkeit	20 °C	490 - 630 MPa Show Material materials with Zugfestigkeit of 490 - 630 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
	20 °C	490 - 680 MPa Show Material materials with Zugfestigkeit of 490 - 680 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat
	20 °C	510 - 680 MPa Show Material materials with Zugfestigkeit of 510 - 680 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat
	20 °C	510 - 630 MPa Show Material materials with Zugfestigkeit of 510 - 630 MPa	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Sheet, Strip, Flat

Thermisch

Property	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	1.32e-05 - 1.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.32e-05 - 1.38e-05 1/K				Typical for Low Carbon Steel
Max. Betriebstemperatur	-20 °C Show Material materials with Max. Betriebstemperatur of -20 °C	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat	Long
	500 °C Show Material materials with Max. Betriebstemperatur of 500 °C				Typical for Carbon Steel
Schmelzpunkt	1480 - 1526 °C Show Material materials with Schmelzpunkt of 1480 - 1526 °C				Typical for Low Carbon Steel
Spezifische Wärmekapazität	465 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 465 J/(kg·K)				Typical for Low Carbon Steel
Wärmeleitfähigkeit	25 - 93 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 25 - 93 W/(m·K)				Typical for Low Carbon Steel

Elektrisch

Property	Value	Comment
Elektrische Leitfähigkeit	8 S/m Show Material materials with Elektrische Leitfähigkeit of 8 S/m	Predicted Value
spezifischer Widerstand	1.43e-07 - 1.74e-07 Ω·m Show Material materials with spezifischer Widerstand of 1.43e-07 - 1.74e-07 Ω·m	Typical for Carbon Steel

Magnetisch

Property	Value	Comment
Curie-Temperatur	770 °C Show Material materials with Curie-Temperatur of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value	Condition	Related Standards	Shape
Kohlenstoff	0.2 % Show Material materials with Kohlenstoff of 0.2 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Mangan	1.6 % Show Material materials with Mangan of 1.6 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Phosphor	0.04 % Show Material materials with Phosphor of 0.04 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Schwefel	0.04 % Show Material materials with Schwefel of 0.04 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Silizium	0.55 % Show Material materials with Silizium of 0.55 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat
Stickstoff	0.009 % Show Material materials with Stickstoff of 0.009 %	as-rolled condition (+AR)	EN 10025, EN 10025-1, EN 10025-2	Bar, Sheet, Strip, Flat

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 3 supplier of EN 10025-2 Grade S355J0C as-rolled condition (+AR) on Matmatch