EN 10025-5 Grade S355J2W normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The weather resistant steel S355J2W with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exhaust systems, vehicle construction, toolbuilding. The grid rate have to considered in the dimensioning process. An conventional surface protection is recommend at polluted air and necessary at long-time water wetting, constant wetness or close to the sea. Unweathered areas with condensate generation have to be adequate ventilated. Before welding the coating have to be removed in a distance of 10 - 20 mm from the welding edge. With increasing thickness, strength and carbon equivalent the occurence of cold cracks in the welding zone is possible. The recommendation of the EURONORM Information No. 2 (EN 1011-2) have to considered.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	7.8 g/cm³ Show Material materials with Dichte of 7.8 g/cm³	Typical for Steel

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		17.6 % Show Material materials with Dehnung of 17.6 %				Predicted Value, A200
		21.8 % Show Material materials with Dehnung of 21.8 %				Predicted Value, A5
		23.7 % Show Material materials with Dehnung of 23.7 %				Predicted Value, A50
	20 °C	14 % Show Material materials with Dehnung of 14 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	15 % Show Material materials with Dehnung of 15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Dehnung of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Dehnung of 16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	17 % Show Material materials with Dehnung of 17 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Dehnung of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Dehnung of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	18 % Show Material materials with Dehnung of 18 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	19 % Show Material materials with Dehnung of 19 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	20 % Show Material materials with Dehnung of 20 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	20 % Show Material materials with Dehnung of 20 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	21 % Show Material materials with Dehnung of 21 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	22 % Show Material materials with Dehnung of 22 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Elastizitätsmodul		190 - 210 GPa Show Material materials with Elastizitätsmodul of 190 - 210 GPa				Typical for Steel
Flächenreduzierung		45.3 % Show Material materials with Flächenreduzierung of 45.3 %				Predicted Value, Transverse
		52.2 % Show Material materials with Flächenreduzierung of 52.2 %				Predicted Value
Härte, Brinell		234 [-] Show Material materials with Härte, Brinell of 234 [-]				Predicted Value, Transverse
Poissonzahl		0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]				Typical for Steel
Scherfestigkeit		539.7 MPa Show Material materials with Scherfestigkeit of 539.7 MPa				Predicted Value
Schubmodule		80.2 GPa Show Material materials with Schubmodule of 80.2 GPa				Predicted Value
Streckgrenze		260.9 MPa Show Material materials with Streckgrenze of 260.9 MPa				Predicted Value, RP1
		286.6 MPa Show Material materials with Streckgrenze of 286.6 MPa				Predicted Value, RP1 Transverse
		388.1 MPa Show Material materials with Streckgrenze of 388.1 MPa				Predicted Value, RP02
		393.3 MPa Show Material materials with Streckgrenze of 393.3 MPa				Predicted Value, RP05
		407.9 MPa Show Material materials with Streckgrenze of 407.9 MPa				Predicted Value, RP02 Transverse
		468.6 MPa Show Material materials with Streckgrenze of 468.6 MPa				Predicted Value, RP002
	20 °C	295 MPa Show Material materials with Streckgrenze of 295 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	295 MPa Show Material materials with Streckgrenze of 295 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	315 MPa Show Material materials with Streckgrenze of 315 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	315 MPa Show Material materials with Streckgrenze of 315 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	325 MPa Show Material materials with Streckgrenze of 325 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	325 MPa Show Material materials with Streckgrenze of 325 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	335 MPa Show Material materials with Streckgrenze of 335 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	335 MPa Show Material materials with Streckgrenze of 335 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	345 MPa Show Material materials with Streckgrenze of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	345 MPa Show Material materials with Streckgrenze of 345 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	355 MPa Show Material materials with Streckgrenze of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	355 MPa Show Material materials with Streckgrenze of 355 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Zugfestigkeit	20 °C	450 - 680 MPa Show Material materials with Zugfestigkeit of 450 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 630 MPa Show Material materials with Zugfestigkeit of 450 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 600 MPa Show Material materials with Zugfestigkeit of 450 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	450 - 680 MPa Show Material materials with Zugfestigkeit of 450 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	450 - 630 MPa Show Material materials with Zugfestigkeit of 450 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	450 - 600 MPa Show Material materials with Zugfestigkeit of 450 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 680 MPa Show Material materials with Zugfestigkeit of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 630 MPa Show Material materials with Zugfestigkeit of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 600 MPa Show Material materials with Zugfestigkeit of 470 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	470 - 680 MPa Show Material materials with Zugfestigkeit of 470 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 630 MPa Show Material materials with Zugfestigkeit of 470 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	470 - 600 MPa Show Material materials with Zugfestigkeit of 470 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 680 MPa Show Material materials with Zugfestigkeit of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 630 MPa Show Material materials with Zugfestigkeit of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 600 MPa Show Material materials with Zugfestigkeit of 510 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	510 - 680 MPa Show Material materials with Zugfestigkeit of 510 - 680 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 630 MPa Show Material materials with Zugfestigkeit of 510 - 630 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 600 MPa Show Material materials with Zugfestigkeit of 510 - 600 MPa	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire

Thermisch

Property	Value	Comment
Koeffizient der thermischen Ausdehnung	12.02 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 12.02 1/K	Predicted Value
Spezifische Wärmekapazität	455 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 455 J/(kg·K)	Predicted Value
Wärmeleitfähigkeit	36.13 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 36.13 W/(m·K)	Predicted Value

Elektrisch

Property	Value	Comment
Elektrische Leitfähigkeit	3 S/m Show Material materials with Elektrische Leitfähigkeit of 3 S/m	Predicted Value
spezifischer Widerstand	35 Ω·m Show Material materials with spezifischer Widerstand of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.4 - 0.8 % Show Material materials with Chrom of 0.4 - 0.8 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Kohlenstoff	0.16 % Show Material materials with Kohlenstoff of 0.16 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Kupfer	0.25 - 0.55 % Show Material materials with Kupfer of 0.25 - 0.55 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Mangan	0.5 - 1.5 % Show Material materials with Mangan of 0.5 - 1.5 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Molybdän	0.3 % Show Material materials with Molybdän of 0.3 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Nickel	0.65 % Show Material materials with Nickel of 0.65 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Phosphor	0.03 % Show Material materials with Phosphor of 0.03 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Schwefel	0.03 % Show Material materials with Schwefel of 0.03 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Silizium	0.5 % Show Material materials with Silizium of 0.5 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire
Zirkonium	0.15 % Show Material materials with Zirkonium of 0.15 %	normalized or normalized formed (+N)	EN 10025-5, EN 10155	Strip, Sheet, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 11 supplier of EN 10025-5 Grade S355J2W normalized or normalized formed (+N) on Matmatch

EN 10025-5 Grade S355J2W normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 8 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften